PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A300-10-50
A300-10-50 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

TEST STAND,HYDRAULIC SYSTEM COMP. Key specifications include accumulator: NOT INCLUDED, power_source: GASOLINE ENGINE, usage_design: AIRCRAFT HYDRAULIC SYSTEM, pressure_rating: 3000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL AND 5000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS, filtering_system: INCLUDED, special_features: TWO INDEPENDENT SYSTEMS W/MANIFOLD CAPABILITIES. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-676-4575, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A300-10-50
NSN: 5315-00-676-4575
FSC: 5315
CAGE: 82386 — JAIDINGER MANUFACTURING CO INC DBA JAIDINGER MANUFACTURING CO INC (USA)
SPECIFICATIONS
accumulatorNOT INCLUDED
power_sourceGASOLINE ENGINE
usage_designAIRCRAFT HYDRAULIC SYSTEM
pressure_rating3000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL AND 5000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL LBS
filtering_systemINCLUDED
special_featuresTWO INDEPENDENT SYSTEMS W/MANIFOLD CAPABILITIES
horsepower_rating150.0
installation_designPORTABLE
flow_capacity_rating60.0 GALLONS PER MINUTE
pressure/suction_hoseINCLUDED
hydraulic_fluid_flow_rate30.0 GALLONS PER MINUTE
nondefinitive_spec/std_dataMJ-2A TYPE A
NSN5315-00-676-4575
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A300-10-50 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
MILS26877Interchangeable
interchangeable cross-reference
interchangeable
TYPE MJ-2Interchangeable
interchangeable cross-reference
interchangeable
A300-10-50Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A300-10-50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A300-10-50?
A300-10-50 is a TEST STAND,HYDRAULIC SYSTEM COMP.
What parts can replace A300-10-50?
There are 3 known substitutes for A300-10-50: MILS26877, TYPE MJ-2, A300-10-50. Substitute compatibility should be verified for your specific system.
What is the NSN for A300-10-50?
A300-10-50 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-676-4575. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A300-10-50

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026