PartsTable
Technical Data Sheet
Download PDF

A3-2DIN6797SNB7 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

A3-2DIN6797SNB7: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.115 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN, outside_diameter: 0.260 INCHES NOMINAL IN, style_designator: FLAT EXTERNAL TEETH, surface_treatment: CADMIUM OVERALL, material_thickness: 0.019 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-735-7940, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A3-2DIN6797SNB7
NSN: 5310-00-735-7940
FSC: 5310 — Nuts and Washers
CAGE: D8385 — THALES DEUTSCHLAND GMBH DIV CUSTOMER SERVICES (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.115 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN
outside_diameter0.260 INCHES NOMINAL IN
style_designatorFLAT EXTERNAL TEETH
surface_treatmentCADMIUM OVERALL
material_thickness0.019 INCHES NOMINAL IN
NSN5310-00-735-7940
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A3-2DIN6797SNB7 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
OUTSIDE DIAMETER: 0.260 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.019 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORFLAT EXTERNAL TEETH
OUTSIDE DIAMETER0.260 INCHES NOMINAL IN
MATERIAL THICKNESS0.019 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.115 INCHES MINIMUM AND 0.123 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
107392Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy A3-2DIN6797SNB7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A3-2DIN6797SNB7?
A3-2DIN6797SNB7 is a WASHER,LOCK.
What parts can replace A3-2DIN6797SNB7?
There is 1 known substitute for A3-2DIN6797SNB7: 107392. Substitute compatibility should be verified for your specific system.
What is the NSN for A3-2DIN6797SNB7?
A3-2DIN6797SNB7 is cataloged in the U.S. Government catalog under NSN 5310-00-735-7940. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A3-2DIN6797SNB7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.