PartsTable
Technical Data Sheet
Download PDF

A29763 — PUSH ON NUT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

A29763: PUSH ON NUT.

The PUSH ON NUT is a the manufacturer industrial component. Key specifications include nut_style: PUSH ON, nut_diameter: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, material_thickness: 0.0137 INCHES MINIMUM AND 0.0163 INCHES MAXIMUM IN, mating_member_diameter_accommodated: 0.500 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-846-8557, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A29763
NSN: 5310-00-846-8557
FSC: 5310 — Nuts and Washers
CAGE: 5RQL2 — DRS ENVIRONMENTAL SYSTEMS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1074 OR STEEL COMP 1078 OR STEEL COMP 1080 OR STEEL COMP 1084 OR STEEL COMP 1085 OR STEEL COMP 1086 OR STEEL COMP 1090 OVERALL
nut_stylePUSH ON
nut_diameter0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
material_thickness0.0137 INCHES MINIMUM AND 0.0163 INCHES MAXIMUM IN
mating_member_diameter_accommodated0.500 INCHES NOMINAL IN
NSN5310-00-846-8557
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A29763 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.0137 INCHES MINIMUM AND 0.0163 INCHES MAXIMUM IN
•
NUT DIAMETER: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
MATING MEMBER DIAMETER ACCOMMODATED: 0.500 INCHES NOMINAL IN
•
NUT STYLE: PUSH ON
•
MATERIAL: STEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1074 OR STEEL COMP 1078 OR STEEL COMP 1080 OR STEEL COMP 1084 OR STEEL COMP 1085 OR STEEL COMP 1086 OR STEEL COMP 1090 OVERALL
TECHNICAL CHARACTERISTICS
MATERIAL THICKNESS0.0137 INCHES MINIMUM AND 0.0163 INCHES MAXIMUM IN
NUT DIAMETER0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
MATING MEMBER DIAMETER ACCOMMODATED0.500 INCHES NOMINAL IN
NUT STYLEPUSH ON
MATERIALSTEEL COMP 1065 OR STEEL COMP 1070 OR STEEL COMP 1074 OR STEEL COMP 1078 OR STEEL COMP 1080 OR STEEL COMP 1084 OR STEEL COMP 1085 OR STEEL COMP 1086 OR STEEL COMP 1090 OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
29763Reference document
Same NSN cross-reference
Reference document — Secondary reference
5105-50Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy A29763?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A29763?
A29763 is a PUSH ON NUT.
What parts can replace A29763?
There are 2 known substitutes for A29763: 29763, 5105-50. Substitute compatibility should be verified for your specific system.
What is the NSN for A29763?
A29763 is cataloged in the U.S. Government catalog under NSN 5310-00-846-8557. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A29763