PartsTable
Technical Data Sheet
Download PDF

A296503 — SEAT,HELICAL COMPRESSION SPRING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A296503: SEAT,HELICAL COMPRESSION SPRING.

SEAT,HELICAL COMPRESSION SPRING. Key specifications include material: STEEL, design_type: SOLID, end_diameter: 0.8480 INCHES MINIMUM AND 0.8560 INCHES MAXIMUM IN, bore_diameter: 0.6170 INCHES MINIMUM AND 0.6190 INCHES MAXIMUM IN, overall_height: 0.4100 INCHES MINIMUM AND 0.4300 INCHES MAXIMUM IN, special_features: NOT CASEHARDENED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-350-4796, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A296503
NSN: 5340-00-350-4796
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL
design_typeSOLID
end_diameter0.8480 INCHES MINIMUM AND 0.8560 INCHES MAXIMUM IN
bore_diameter0.6170 INCHES MINIMUM AND 0.6190 INCHES MAXIMUM IN
overall_height0.4100 INCHES MINIMUM AND 0.4300 INCHES MAXIMUM IN
special_featuresNOT CASEHARDENED
style_designatorSEAT
bore_taper_in_deg12.0
first_step_length0.0400 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM IN
seat_angle_in_deg15.0
first_step_diameter1.2380 INCHES MINIMUM AND 1.2460 INCHES MAXIMUM IN
second_end_diameter1.3100 INCHES MINIMUM AND 1.3300 INCHES MAXIMUM IN
NSN5340-00-350-4796
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A296503 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COUNTERSINK ANGLE IN DEG: 45.0
•
FSC APPLICATION DATA: ENGINE,GASOLINE,NON-AIRCRAFT
•
FIRST STEP DIAMETER: 1.2380 INCHES MINIMUM AND 1.2460 INCHES MAXIMUM IN
•
END DIAMETER: 0.8480 INCHES MINIMUM AND 0.8560 INCHES MAXIMUM IN
•
SEAT ANGLE IN DEG: 15.0
•
COUNTERSINK DIAMETER: 0.8000 INCHES NOMINAL IN
•
SECOND END DIAMETER: 1.3100 INCHES MINIMUM AND 1.3300 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.4100 INCHES MINIMUM AND 0.4300 INCHES MAXIMUM IN
COUNTERSINK ANGLE IN DEG45.0
FSC APPLICATION DATAENGINE,GASOLINE,NON-AIRCRAFT
FIRST STEP DIAMETER1.2380 INCHES MINIMUM AND 1.2460 INCHES MAXIMUM IN
END DIAMETER0.8480 INCHES MINIMUM AND 0.8560 INCHES MAXIMUM IN
SEAT ANGLE IN DEG15.0
COUNTERSINK DIAMETER0.8000 INCHES NOMINAL IN
SECOND END DIAMETER1.3100 INCHES MINIMUM AND 1.3300 INCHES MAXIMUM IN
DISTANCE FROM END TO FIRST STEP0.2100 INCHES MINIMUM AND 0.2300 INCHES MAXIMUM IN
DESIGN TYPESOLID
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
GG6514Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — mutilation
Ready to buy A296503?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A296503?
A296503 is a SEAT,HELICAL COMPRESSION SPRING.
What parts can replace A296503?
There is 1 known substitute for A296503: GG6514. Substitute compatibility should be verified for your specific system.
What is the NSN for A296503?
A296503 is cataloged in the U.S. Government catalog under NSN 5340-00-350-4796. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A296503