PartsTable
Technical Data Sheet
Download PDF

A285-0485 — ROD,STRAIGHT,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A285-0485: ROD,STRAIGHT,HEADLESS.

The ROD,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, chamfer_angle: 45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED, hole_diameter: 2.060 INCHES LOCATION NOT OTHERWISE SPECIFIED IN, chamfer_length: 0.030 INCHES MINIMUM AND 0.090 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_length: 21.090 INCHES MINIMUM AND 21.150 INCHES MAXIMUM IN, overall_diameter: 2.350 INCHES MINIMUM AND 2.410 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-503-5580, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A285-0485
NSN: 5340-01-503-5580
FSC: 5340 — Hardware, Commercial
CAGE: 03533 — CRANE CARRIER COMPANY, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
chamfer_angle45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
hole_diameter2.060 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
chamfer_length0.030 INCHES MINIMUM AND 0.090 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_length21.090 INCHES MINIMUM AND 21.150 INCHES MAXIMUM IN
overall_diameter2.350 INCHES MINIMUM AND 2.410 INCHES MAXIMUM IN
overall_thickness0.156 INCHES NOMINAL IN
end_item_identification2320014525579 TRUCK TRACTOR
NSN5340-01-503-5580
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A285-0485 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.030 INCHES MINIMUM AND 0.090 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
OVERALL DIAMETER: 2.350 INCHES MINIMUM AND 2.410 INCHES MAXIMUM IN
•
OVERALL THICKNESS: 0.156 INCHES NOMINAL IN
•
HOLE DIAMETER: 2.060 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
•
CHAMFER ANGLE: 45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.030 INCHES MINIMUM AND 0.090 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL DIAMETER2.350 INCHES MINIMUM AND 2.410 INCHES MAXIMUM IN
OVERALL THICKNESS0.156 INCHES NOMINAL IN
OVERALL LENGTH21.090 INCHES MINIMUM AND 21.150 INCHES MAXIMUM IN
HOLE DIAMETER2.060 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
CHAMFER ANGLE45.0 DEGREES NOMINAL LOCATION NOT OTHERWISE SPECIFIED
END ITEM IDENTIFICATION2320014525579 TRUCK TRACTOR
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy A285-0485?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A285-0485?
A285-0485 is a ROD,STRAIGHT,HEADLESS.
What is the NSN for A285-0485?
A285-0485 is cataloged in the U.S. Government catalog under NSN 5340-01-503-5580. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A285-0485

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.