PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A2711P
A2711P ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 1.238 INCHES MINIMUM AND 1.262 INCHES MAXIMUM IN, pin_overall_diameter: 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, first_end_taper_angle: 25.0 DEGREES NOMINAL, first_end_taper_length: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3786, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A2711P
NSN: 5315-00-010-3786
FSC: 5315
CAGE: 61208 — TWIN DISC, INCORPORATED DBA TWIN DISC MID-ATLANTIC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length1.238 INCHES MINIMUM AND 1.262 INCHES MAXIMUM IN
pin_overall_diameter0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
first_end_taper_angle25.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
material_document_and_classificationQQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-010-3786
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A2711P · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER ANGLE: 25.0 DEGREES NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PIN OVERALL LENGTH: 1.238 INCHES MINIMUM AND 1.262 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL DIAMETER: 0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
TECHNICAL CHARACTERISTICS (FLIS)
FIRST END TAPER ANGLE25.0 DEGREES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633,FS1010 TO FS1030 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL LENGTH1.238 INCHES MINIMUM AND 1.262 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL DIAMETER0.4970 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
103786Interchangeable
interchangeable cross-reference
interchangeable
JWE-6Interchangeable
interchangeable cross-reference
interchangeable
1000-0378-6Interchangeable
interchangeable cross-reference
interchangeable
477BJACKInterchangeable
interchangeable cross-reference
interchangeable
A2006Interchangeable
interchangeable cross-reference
interchangeable
MS39058-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A2711P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A2711P?
A2711P is a PIN,STRAIGHT,HEADLESS.
What parts can replace A2711P?
There are 20 known substitutes for A2711P: 103786, JWE-6, 1000-0378-6 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A2711P?
A2711P is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-010-3786. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A2711P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026