PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A26040-14-7
A26040-14-7 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The PLATE,RETAINING,BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, outside_diameter: 3.250 INCHES NOMINAL IN, aperture_diameter: 1.750 INCHES NOMINAL IN, mounting_hole_diameter: 0.234 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-451-1534, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A26040-14-7
NSN: 3110-00-451-1534
FSC: 3110
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
outside_diameter3.250 INCHES NOMINAL IN
aperture_diameter1.750 INCHES NOMINAL IN
mounting_hole_diameter0.234 INCHES NOMINAL IN
end_item_identification2320-01-097-0248,2320-01-097-0249,2320-01-100-7672,2320-01-097-0260,2320-01-195-7641, HEMTT FAMILY (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS)
bolt_circle_hole_quantity4
NSN3110-00-451-1534
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A26040-14-7 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 1.750 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
MOUNTING HOLE DIAMETER: 0.234 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.250 INCHES NOMINAL IN
•
BOLT CIRCLE HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER1.750 INCHES NOMINAL IN
END ITEM IDENTIFICATION2320-01-097-0248,2320-01-097-0249,2320-01-100-7672,2320-01-097-0260,2320-01-195-7641, HEMTT FAMILY (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS)
MATERIALSTEEL OVERALL
MOUNTING HOLE DIAMETER0.234 INCHES NOMINAL IN
OUTSIDE DIAMETER3.250 INCHES NOMINAL IN
BOLT CIRCLE HOLE QUANTITY4
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
APL1-5-60-302-MInterchangeable
interchangeable cross-reference
interchangeable
112111Interchangeable
interchangeable cross-reference
interchangeable
PAM12RSKMG6-3-250-60Interchangeable
interchangeable cross-reference
interchangeable
59234Interchangeable
interchangeable cross-reference
interchangeable
43-137-039Interchangeable
interchangeable cross-reference
interchangeable
623-00006Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A26040-14-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A26040-14-7?
A26040-14-7 is a PLATE,RETAINING,BEARING.
What parts can replace A26040-14-7?
There are 8 known substitutes for A26040-14-7: APL1-5-60-302-M, 112111, PAM12RSKMG6-3-250-60 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A26040-14-7?
A26040-14-7 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-451-1534. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A26040-14-7

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026