PartsTable
Technical Data Sheet
Download PDF

A2526-11 — BEARING,BALL,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

A2526-11: BEARING,BALL,THRUST.

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN, alignment_type: RIGID, overall_height: 0.8110 INCHES MAXIMUM IN, surface_finish: GROUND, special_features: GREASE LUBE. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-803-5459, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A2526-11
NSN: 3110-00-803-5459
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 00658 — ABC ACQUISITION COMPANY DBA AETNA BEARING COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
alignment_typeRIGID
overall_height0.8110 INCHES MAXIMUM IN
surface_finishGROUND
special_featuresGREASE LUBE
style_designatorCLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
overall_outside_diameter3.8220 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
thrust_directional_capability_designationSINGLE
NSN3110-00-803-5459
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A2526-11 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 3.8220 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
OVERALL HEIGHT0.8110 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATORCLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER3.8220 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESGREASE LUBE
BORE DIAMETER2.2490 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
1925798Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A2526-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A2526-11?
A2526-11 is a BEARING,BALL,THRUST.
What parts can replace A2526-11?
There is 1 known substitute for A2526-11: 1925798. Substitute compatibility should be verified for your specific system.
What is the NSN for A2526-11?
A2526-11 is cataloged in the U.S. Government catalog under NSN 3110-00-803-5459. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A2526-11