PartsTable
Technical Data Sheet
Download PDF

A24384-1 — BEARING,BALL,AIRFRAME

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

A24384-1: BEARING,BALL,AIRFRAME.

The BEARING,BALL,AIRFRAME is a the manufacturer industrial component. Key specifications include bore_diameter: 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN, inner_ring_width: 0.2810 INCHES NOMINAL IN, outer_ring_width: 0.2785 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN, overall_outside_diameter: 1.1870 INCHES MINIMUM AND 1.1875 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-133-5192, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A24384-1
NSN: 3110-00-133-5192
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 9P5N5 — MOOG MILITARY AIRCRAFT LLC (USA)
SPECIFICATIONS
bore_diameter0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
inner_ring_width0.2810 INCHES NOMINAL IN
outer_ring_width0.2785 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN
overall_outside_diameter1.1870 INCHES MINIMUM AND 1.1875 INCHES MAXIMUM IN
NSN3110-00-133-5192
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A24384-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 0.2785 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN
•
OVERALL OUTSIDE DIAMETER: 1.1870 INCHES MINIMUM AND 1.1875 INCHES MAXIMUM IN
•
BORE DIAMETER: 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
•
INNER RING WIDTH: 0.2810 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OUTER RING WIDTH0.2785 INCHES MINIMUM AND 0.2810 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER1.1870 INCHES MINIMUM AND 1.1875 INCHES MAXIMUM IN
BORE DIAMETER0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
INNER RING WIDTH0.2810 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
10107338Reference document
Same NSN cross-reference
Reference document — Informative reference only
MB539Reference document
Same NSN cross-reference
Reference document — Secondary reference
ES168-539Reference document
Same NSN cross-reference
Reference document — Secondary reference
A24348-001Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A24384-001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy A24384-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A24384-1?
A24384-1 is a BEARING,BALL,AIRFRAME.
What parts can replace A24384-1?
There are 5 known substitutes for A24384-1: 10107338, MB539, ES168-539 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A24384-1?
A24384-1 is cataloged in the U.S. Government catalog under NSN 3110-00-133-5192. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A24384-1