PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A232110
A232110 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The GROMMET,NONMETALLIC is a the manufacturer industrial component. Key specifications include material: RUBBER NATURAL OVERALL, groove_width: 0.062 INCHES NOMINAL IN, grommet_style: ROUND, hole_diameter: 0.437 INCHES NOMINAL IN, overall_height: 0.250 INCHES NOMINAL IN, flange_thickness: 0.094 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-281-2118, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A232110
NSN: 5325-00-281-2118
FSC: 5325
CAGE: 80045 — L3HARRIS CINCINNATI ELECTRONICS CORPORATION (USA)
SPECIFICATIONS
materialRUBBER NATURAL OVERALL
groove_width0.062 INCHES NOMINAL IN
grommet_styleROUND
hole_diameter0.437 INCHES NOMINAL IN
overall_height0.250 INCHES NOMINAL IN
flange_thickness0.094 INCHES NOMINAL IN
groove_outside_diameter0.562 INCHES NOMINAL IN
grommet_construction_typeSOLID
nonmetallic_hardness_rating55.0 MINIMUM SHORE DUROMETER A AND 60.0 MAXIMUM SHORE DUROMETER A
large_flange_outside_diameter0.750 INCHES NOMINAL IN
NSN5325-00-281-2118
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: A232110 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GROMMET CONSTRUCTION TYPE: SOLID
•
HOLE DIAMETER: 0.437 INCHES NOMINAL IN
•
NONMETALLIC HARDNESS RATING: 55.0 MINIMUM SHORE DUROMETER A AND 60.0 MAXIMUM SHORE DUROMETER A
•
GROOVE OUTSIDE DIAMETER: 0.562 INCHES NOMINAL IN
•
GROMMET STYLE: ROUND
•
MATERIAL: RUBBER NATURAL OVERALL
•
GROOVE WIDTH: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.250 INCHES NOMINAL IN
GROMMET CONSTRUCTION TYPESOLID
HOLE DIAMETER0.437 INCHES NOMINAL IN
NONMETALLIC HARDNESS RATING55.0 MINIMUM SHORE DUROMETER A AND 60.0 MAXIMUM SHORE DUROMETER A
GROOVE OUTSIDE DIAMETER0.562 INCHES NOMINAL IN
GROMMET STYLEROUND
MATERIALRUBBER NATURAL OVERALL
GROOVE WIDTH0.062 INCHES NOMINAL IN
LARGE FLANGE OUTSIDE DIAMETER0.750 INCHES NOMINAL IN
FLANGE THICKNESS0.094 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
5285Interchangeable
interchangeable cross-reference
interchangeable
AV32Interchangeable
interchangeable cross-reference
interchangeable
31Interchangeable
interchangeable cross-reference
interchangeable
8135-00-239-5285Interchangeable
interchangeable cross-reference
interchangeable
75-279-3Interchangeable
interchangeable cross-reference
interchangeable
A75-279Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A232110?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A232110?
A232110 is a GROMMET,NONMETALLIC.
What parts can replace A232110?
There are 15 known substitutes for A232110: 5285, AV32, 31 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A232110?
A232110 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5325-00-281-2118. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A232110

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026