PartsTable
Technical Data Sheet
Download PDF

A231SR721-80 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A231SR721-80: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, center_hole_diameter: 2.599 INCHES MINIMUM AND 2.619 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, cross-sectional_shape_style: O-RING, material_document_and_classification: SR721-80,FSCM 02858 MFR REF SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-136-2717, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A231SR721-80
NSN: 5330-00-136-2717
FSC: 5330 — Packing and Gasket Materials
CAGE: 95272 — STILLMAN SEAL CORPORATION DIV STILLMAN SEAL CORPERATION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
center_hole_diameter2.599 INCHES MINIMUM AND 2.619 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
cross-sectional_shape_styleO-RING
material_document_and_classificationSR721-80,FSCM 02858 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-136-2717
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A231SR721-80 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SR721-80,FSCM 02858 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: O-RING
•
CENTER HOLE DIAMETER: 2.599 INCHES MINIMUM AND 2.619 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSR721-80,FSCM 02858 MFR REF SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEO-RING
CENTER HOLE DIAMETER2.599 INCHES MINIMUM AND 2.619 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
A2313R721-80Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy A231SR721-80?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A231SR721-80?
A231SR721-80 is a PACKING,PREFORMED.
What parts can replace A231SR721-80?
There is 1 known substitute for A231SR721-80: A2313R721-80. Substitute compatibility should be verified for your specific system.
What is the NSN for A231SR721-80?
A231SR721-80 is cataloged in the U.S. Government catalog under NSN 5330-00-136-2717. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A231SR721-80