PartsTable / COMPONENT / A228849
A228849
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.750 INCHES NOMINAL IN, overall_length: 1.438 INCHES NOMINAL IN, style_designator: CURVED ARCH. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-522-8849, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
A228849
NSN: 5340-00-522-8849 FSC: 5340 CAGE: 00000
SPECIFICATIONS
cushion NOT INCLUDED material STEEL LOCATION NOT OTHERWISE SPECIFIED mounting_pad NOT INCLUDED overall_width 0.750 INCHES NOMINAL IN overall_length 1.438 INCHES NOMINAL IN style_designator CURVED ARCH surface_treatment CADMIUM material_thickness 0.063 INCHES NOMINAL IN mounting_hole_size 0.266 INCHES NOMINAL IN inside_diameter/arch_length 0.563 INCHES NOMINAL IN distance_between_base_and_inside_of_arch 0.469 INCHES NOMINAL IN center_to_center_distance_between_arch_and_mounting_hole 0.844 INCHES NOMINAL IN NSN 5340-00-522-8849
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: A228849
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE: 0.844 INCHES NOMINAL IN
• MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
• STYLE DESIGNATOR: CURVED ARCH
• MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
• SURFACE TREATMENT: CADMIUM
• INSIDE DIAMETER/ARCH LENGTH: 0.563 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE 0.844 INCHES NOMINAL IN MATERIAL THICKNESS 0.063 INCHES NOMINAL IN CUSHION NOT INCLUDED STYLE DESIGNATOR CURVED ARCH MATERIAL STEEL LOCATION NOT OTHERWISE SPECIFIED SURFACE TREATMENT CADMIUM OVERALL LENGTH 1.438 INCHES NOMINAL IN INSIDE DIAMETER/ARCH LENGTH 0.563 INCHES NOMINAL IN OVERALL WIDTH 0.750 INCHES NOMINAL IN DISTANCE BETWEEN BASE AND INSIDE OF ARCH 0.469 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
2516-1 Interchangeable interchangeable cross-reference
interchangeable
20105 Interchangeable interchangeable cross-reference
interchangeable
74069 Interchangeable interchangeable cross-reference
interchangeable
402 Interchangeable interchangeable cross-reference
interchangeable
SA6478-529-1 Interchangeable interchangeable cross-reference
interchangeable
57-80409-1 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy A228849?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A228849?
A228849 is a STRAP,RETAINING.
What parts can replace A228849?
There are 7 known substitutes for A228849: 2516-1, 20105, 74069 and 4 more. Substitute compatibility should be verified for your specific system.
Is A228849 still available?
A228849 is currently cancelled.
Request a Quote — A228849