PartsTable
Technical Data Sheet
PartsTable / MRO / A2209
A2209 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The FUSEHOLDER,EXTRACTOR POST is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY CONTACT, body_style: BUSHING MOUNTED TYPE, lens_color: AMBER, cap_diameter: 0.530 INCHES NOMINAL IN, alignment_type: RIGID, overall_height: 0.6250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1716, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ A2209
NSN: 3110-00-156-1716
FSC: 3110
CAGE: 70801 — AUTOMOTIVE THRUST BEARING CORP (USA)
SPECIFICATIONS
materialCOPPER ALLOY CONTACT
body_styleBUSHING MOUNTED TYPE
lens_colorAMBER
cap_diameter0.530 INCHES NOMINAL IN
alignment_typeRIGID
overall_height0.6250 INCHES NOMINAL IN
overall_length3.310 INCHES MAXIMUM IN
surface_finishGROUND
resistor_rating330.0 OHMS
bushing_diameter0.625 INCHES NOMINAL IN
overall_diameter0.810 INCHES NOMINAL IN
style_designatorGROOVED RACE SURFACE
NSN3110-00-156-1716
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A2209 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
ALIGNMENT TYPE: RIGID
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
MATERIAL: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL
•
OVERALL OUTSIDE DIAMETER: 1.9688 INCHES NOMINAL IN
•
BORE SMALLEST DIAMETER: 1.0000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
ALIGNMENT TYPERIGID
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
OVERALL OUTSIDE DIAMETER1.9688 INCHES NOMINAL IN
OVERALL HEIGHT0.6250 INCHES NOMINAL IN
BORE SMALLEST DIAMETER1.0000 INCHES NOMINAL IN
STYLE DESIGNATORGROOVED RACE SURFACE
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
RELEASE5009Interchangeable
interchangeable cross-reference
interchangeable
1N4731AAInterchangeable
interchangeable cross-reference
interchangeable
1N4731AInterchangeable
interchangeable cross-reference
interchangeable
BS1010PC7Interchangeable
interchangeable cross-reference
interchangeable
BS1315PC7Interchangeable
interchangeable cross-reference
interchangeable
BS5-1514PC8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A2209?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A2209?
A2209 is a FUSEHOLDER,EXTRACTOR POST. It is classified as a MRO (MRO_GENERAL).
What parts can replace A2209?
There are 22 known substitutes for A2209: RELEASE5009, 1N4731AA, 1N4731A and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A2209?
A2209 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1716. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A2209

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026