PartsTable
Technical Data Sheet
PartsTable / MRO / A2040
A2040 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL, body_width: 4.000 INCHES NOMINAL IN, body_height: 11.900 INCHES NOMINAL IN, body_length: 9.000 INCHES NOMINAL IN, alignment_type: RIGID, inclosure_type: HERMETICALLY SEALED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1827, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ A2040
NSN: 3110-00-156-1827
FSC: 3110
CAGE: 70801 — AUTOMOTIVE THRUST BEARING CORP (USA)
SPECIFICATIONS
materialSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
body_width4.000 INCHES NOMINAL IN
body_height11.900 INCHES NOMINAL IN
body_length9.000 INCHES NOMINAL IN
alignment_typeRIGID
inclosure_typeHERMETICALLY SEALED
overall_height1.1250 INCHES NOMINAL IN
overall_length13.840 INCHES NOMINAL IN
surface_finishGROUND
special_featuresPOWDER; LEMON CREME FLAVOR; 4.4 OZ PACKETS OZ
style_designatorRECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES
nominal_thread_size0.250 INCHES IN
NSN3110-00-156-1827
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A2040 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
ALIGNMENT TYPE: RIGID
•
STYLE DESIGNATOR: GROOVED RACE SURFACE
•
BORE SMALLEST DIAMETER: 2.9375 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
SURFACE FINISH: GROUND
•
OVERALL OUTSIDE DIAMETER: 4.4375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
ALIGNMENT TYPERIGID
STYLE DESIGNATORGROOVED RACE SURFACE
BORE SMALLEST DIAMETER2.9375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
SURFACE FINISHGROUND
OVERALL OUTSIDE DIAMETER4.4375 INCHES NOMINAL IN
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
OVERALL HEIGHT1.1250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
4437Interchangeable
interchangeable cross-reference
interchangeable
Y138Interchangeable
interchangeable cross-reference
interchangeable
10086300Interchangeable
interchangeable cross-reference
interchangeable
AS22520Interchangeable
interchangeable cross-reference
interchangeable
501-2511-301Interchangeable
interchangeable cross-reference
interchangeable
SC-D-647368-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A2040?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A2040?
A2040 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace A2040?
There are 21 known substitutes for A2040: 4437, Y138, 10086300 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A2040?
A2040 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1827. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A2040

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026