PartsTable
Technical Data Sheet
PartsTable / MRO / A2-22
A2-22 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: STEEL CORROSION RESISTING OVERALL, body_length: 2.750 INCHES NOMINAL IN, body_material: METAL, inclosure_type: ENCASED, overall_length: 4.250 INCHES NOMINAL IN, first_end_style: CHAMFERED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-088-3520, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ A2-22
NSN: 5315-00-088-3520
FSC: 5315
CAGE: 00141 — ROLLER BEARING CO OF AMERICA, INC DIV PIC DESIGN (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
body_length2.750 INCHES NOMINAL IN
body_materialMETAL
inclosure_typeENCASED
overall_length4.250 INCHES NOMINAL IN
first_end_styleCHAMFERED
style_designatorROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES
maximum_temp_rise25.0 CELSIUS DEGC
surface_treatmentPASSIVATE OVERALL
pin_overall_length2.250 INCHES NOMINAL IN
nominal_thread_size0.437 INCHES IN
operating_temp_range-55.0 TO 125.0 CELSIUS DEGC
NSN5315-00-088-3520
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A2-22 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL LENGTH: 2.250 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.020 INCHES NOMINAL IN
•
PIN OVERALL DIAMETER: 0.1850 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL CORROSION RESISTING OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL LENGTH2.250 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.020 INCHES NOMINAL IN
PIN OVERALL DIAMETER0.1850 INCHES MINIMUM AND 0.1870 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
087-01-080-00Interchangeable
interchangeable cross-reference
interchangeable
444730Interchangeable
interchangeable cross-reference
interchangeable
04-0064 ITEM NO 55Interchangeable
interchangeable cross-reference
interchangeable
A222Interchangeable
interchangeable cross-reference
interchangeable
R89PC4-12Interchangeable
interchangeable cross-reference
interchangeable
R90PC4-12Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A2-22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A2-22?
A2-22 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace A2-22?
There are 8 known substitutes for A2-22: 087-01-080-00, 444730, 04-0064 ITEM NO 55 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A2-22?
A2-22 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-088-3520. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A2-22

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026