PartsTable
Technical Data Sheet
Download PDF

A1CMLN0616G — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

A1CMLN0616G: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.080 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.418 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, fastener_length: 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, special_features: TRIMMED HEX HEAD. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-220-2454, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A1CMLN0616G
NSN: 5305-01-220-2454
FSC: 5305 — Screws
CAGE: 70318 — ALLMETAL SCREW PRODUCTS CORP (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.080 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
thread_class2A A
thread_length0.418 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
screw_materialSTEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L
fastener_length0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
special_featuresTRIMMED HEX HEAD
thread_directionRIGHT-HAND
width_between_flats0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
nominal_thread_diameter0.138 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-220-2454
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: A1CMLN0616G · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.418 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.080 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
FASTENER LENGTH0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
THREAD LENGTH0.418 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SCREW MATERIALSTEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L
SPECIAL FEATURESTRIMMED HEX HEAD
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
M162-214Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy A1CMLN0616G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A1CMLN0616G?
A1CMLN0616G is a SCREW,MACHINE.
What parts can replace A1CMLN0616G?
There is 1 known substitute for A1CMLN0616G: M162-214. Substitute compatibility should be verified for your specific system.
What is the NSN for A1CMLN0616G?
A1CMLN0616G is cataloged in the U.S. Government catalog under NSN 5305-01-220-2454. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A1CMLN0616G