A1BMS-60-32-E — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

A1BMS-60-32-E: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN, thread_length: 0.907 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN, screw_material: COPPER ALLOY. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-417-4955, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

A1BMS-60-32-E

NSN: 5305-00-417-4955
FSC: 5305 — Screws
CAGE: 70318 — ALLMETAL SCREW PRODUCTS CORP (USA)

SPECIFICATIONS

head_style	PAN
head_height	0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
thread_class	2A A
head_diameter	0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM IN
thread_length	0.907 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
screw_material	COPPER ALLOY
fastener_length	0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
internal_drive_style	CROSS RECESS TYPE 1
nominal_thread_diameter	0.190 INCHES IN
minimum_tensile_strength	55000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch	32
NSN	5305-00-417-4955

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE

•

THREAD LENGTH: 0.907 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.190 INCHES IN

•

HEAD STYLE: PAN

•

THREAD DIRECTION: RIGHT-HAND

•

NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
FASTENER LENGTH	0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH	0.907 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.190 INCHES IN
HEAD STYLE	PAN
THREAD DIRECTION	RIGHT-HAND
NONDEFINITIVE SPEC/STD DATA	3 TYPE AND 9C STYLE
SCREW MATERIAL	COPPER ALLOY
MINIMUM TENSILE STRENGTH	55000 POUNDS PER SQUARE INCH LBS

SUBSTITUTES & CROSS-REFERENCES 4

6-1081Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

88-20042-59AReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

FFS92Reference document

Same NSN cross-reference

Reference document — Identification reference

AN5CH10ASame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy A1BMS-60-32-E?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is A1BMS-60-32-E?

A1BMS-60-32-E is a SCREW,MACHINE.

What parts can replace A1BMS-60-32-E?

There are 4 known substitutes for A1BMS-60-32-E: 6-1081, 88-20042-59A, FFS92 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for A1BMS-60-32-E?

A1BMS-60-32-E is cataloged in the U.S. Government catalog under NSN 5305-00-417-4955. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

A1BMS-60-32-E — SCREW,MACHINE

Request a Quote — A1BMS-60-32-E