PartsTable
Technical Data Sheet
Download PDF

A1BMD6016G — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

A1BMD6016G: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, head_height: 0.116 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.354 INCHES MINIMUM AND 0.384 INCHES MAXIMUM IN, screw_material: STEEL CORROSION RESISTING. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-479-1061, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A1BMD6016G
NSN: 5305-01-479-1061
FSC: 5305 — Screws
CAGE: 70318 — ALLMETAL SCREW PRODUCTS CORP (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
head_height0.116 INCHES NOMINAL IN
thread_class2A A
head_diameter0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.354 INCHES MINIMUM AND 0.384 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE II
nominal_thread_diameter0.190 INCHES IN
minimum_tensile_strength1600 POUNDS PER SQUARE INCH LBS
NSN5305-01-479-1061
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: A1BMD6016G · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.116 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A320 ASSN STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.354 INCHES MINIMUM AND 0.384 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.116 INCHES NOMINAL IN
FASTENER LENGTH0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONASTM A320 ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.354 INCHES MINIMUM AND 0.384 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL CORROSION RESISTING
MINIMUM TENSILE STRENGTH1600 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE II
SUBSTITUTES & CROSS-REFERENCES 1
13230E6673Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A1BMD6016G?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A1BMD6016G?
A1BMD6016G is a SCREW,MACHINE.
What parts can replace A1BMD6016G?
There is 1 known substitute for A1BMD6016G: 13230E6673. Substitute compatibility should be verified for your specific system.
What is the NSN for A1BMD6016G?
A1BMD6016G is cataloged in the U.S. Government catalog under NSN 5305-01-479-1061. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A1BMD6016G

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.