PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A17672
A17672 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include peripheral_diameter: 2.499 INCHES MINIMUM AND 2.503 INCHES MAXIMUM IN, center_hole_diameter: 2.000 INCHES NOMINAL IN, cross-sectional_height: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-770-9136, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A17672
NSN: 5330-00-770-9136
FSC: 5330
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
peripheral_diameter2.499 INCHES MINIMUM AND 2.503 INCHES MAXIMUM IN
center_hole_diameter2.000 INCHES NOMINAL IN
cross-sectional_height0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
NSN5330-00-770-9136
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A17672 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.000 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 2.499 INCHES MINIMUM AND 2.503 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.000 INCHES NOMINAL IN
PERIPHERAL DIAMETER2.499 INCHES MINIMUM AND 2.503 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
BAC21X5Interchangeable
interchangeable cross-reference
interchangeable
0022-100Interchangeable
interchangeable cross-reference
interchangeable
CVC1462-5Interchangeable
interchangeable cross-reference
interchangeable
SL4732PC54Interchangeable
interchangeable cross-reference
interchangeable
HL-40025Interchangeable
interchangeable cross-reference
interchangeable
SL4639PC54Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy A17672?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A17672?
A17672 is a PACKING,PREFORMED.
What parts can replace A17672?
There are 17 known substitutes for A17672: BAC21X5, 0022-100, CVC1462-5 and 14 more. Substitute compatibility should be verified for your specific system.
Is A17672 still available?
A17672 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A17672

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026