PartsTable
Technical Data Sheet
Download PDF

A175297 — PLUG,VENT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A175297: PLUG,VENT.

The PLUG,VENT is a the manufacturer industrial component. Key specifications include length: 0.380 INCHES NOMINAL IN, material: COPPER ALLOY, thread_class: 2A A, thread_length: 0.200 INCHES NOMINAL IN, inside_diameter: 0.101 INCHES NOMINAL IN, vent_hole_shape: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-354-4928, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A175297
NSN: 5340-00-354-4928
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
length0.380 INCHES NOMINAL IN
materialCOPPER ALLOY
thread_class2A A
thread_length0.200 INCHES NOMINAL IN
inside_diameter0.101 INCHES NOMINAL IN
vent_hole_shapeROUND
outside_diameter0.187 INCHES NOMINAL IN
vent_hole_diameter0.039 INCHES NOMINAL IN
vent_hole_quantity1
end_connection_typeTHREADED
material_document_and_classificationSAE 72 ASSN STD SINGLE MATERIAL RESPONSE
thread_size_and_series/type_designator10-32 UNF
NSN5340-00-354-4928
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A175297 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
VENT HOLE DIAMETER: 0.039 INCHES NOMINAL IN
•
LENGTH: 0.380 INCHES NOMINAL IN
•
VENT HOLE SHAPE: ROUND
•
THREAD LENGTH: 0.200 INCHES NOMINAL IN
•
END CONNECTION TYPE: THREADED
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE 72 ASSN STD SINGLE MATERIAL RESPONSE
•
OUTSIDE DIAMETER: 0.187 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.101 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
VENT HOLE DIAMETER0.039 INCHES NOMINAL IN
LENGTH0.380 INCHES NOMINAL IN
VENT HOLE SHAPEROUND
THREAD LENGTH0.200 INCHES NOMINAL IN
END CONNECTION TYPETHREADED
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 72 ASSN STD SINGLE MATERIAL RESPONSE
OUTSIDE DIAMETER0.187 INCHES NOMINAL IN
INSIDE DIAMETER0.101 INCHES NOMINAL IN
THREAD CLASS2A A
MATERIALCOPPER ALLOY
SUBSTITUTES & CROSS-REFERENCES 3
2144349Reference document
Same NSN cross-reference
Reference document — Secondary reference
341660Reference document
Same NSN cross-reference
Reference document — Secondary reference
A0538Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy A175297?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A175297?
A175297 is a PLUG,VENT.
What parts can replace A175297?
There are 3 known substitutes for A175297: 2144349, 341660, A0538. Substitute compatibility should be verified for your specific system.
What is the NSN for A175297?
A175297 is cataloged in the U.S. Government catalog under NSN 5340-00-354-4928. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A175297