PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A17466ITEM5
A17466ITEM5 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,CYLINDRICAL is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.8750 INCHES NOMINAL IN, overall_width: 0.6875 INCHES NOMINAL IN, surface_finish: GROUND, locating_feature: NONLOCATING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-420-1130, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A17466ITEM5
NSN: 3110-00-420-1130
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.8750 INCHES NOMINAL IN
overall_width0.6875 INCHES NOMINAL IN
surface_finishGROUND
locating_featureNONLOCATING
style_designatorSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
overall_outside_diameter2.2500 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationRBEC NO.1
NSN3110-00-420-1130
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: A17466ITEM5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 2.2500 INCHES NOMINAL IN
•
RETAINER FABRICATION METHOD: PRESSED
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: SINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
•
LOCATING FEATURE: NONLOCATING
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER2.2500 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
MATERIALSTEEL OVERALL
STYLE DESIGNATORSINGLE ROW, NON-LOCATING, TWO LIP INNER RING, CYLINDRICAL OUTER RING, SEPARABLE
LOCATING FEATURENONLOCATING
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
OVERALL WIDTH0.6875 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONRBEC NO.1
INTERNAL FIT-UP DESIGNATIONSTANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
MS11Interchangeable
interchangeable cross-reference
interchangeable
Z770Interchangeable
interchangeable cross-reference
interchangeable
CRM7Interchangeable
Same NIIN cross-reference
interchangeable
MRJ7-8Interchangeable
Same NIIN cross-reference
interchangeable
RMS9Interchangeable
Same NIIN cross-reference
interchangeable
MRJ7-8CRM7Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A17466ITEM5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A17466ITEM5?
A17466ITEM5 is a BEARING,ROLLER,CYLINDRICAL.
What parts can replace A17466ITEM5?
There are 7 known substitutes for A17466ITEM5: MS11, Z770, CRM7 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A17466ITEM5?
A17466ITEM5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-420-1130. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A17466ITEM5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026