PartsTable
Technical Data Sheet
Download PDF

A17394 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A17394: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: GRAPHITE OVERALL, rim_surface_width: 0.437 INCHES NOMINAL IN, peripheral_diameter: 0.800 INCHES NOMINAL IN, center_hole_diameter: 0.488 INCHES MINIMUM AND 0.493 INCHES MAXIMUM IN, cross-sectional_height: 0.550 INCHES NOMINAL IN, cross-sectional_shape_style: SPECIAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-126-0039, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A17394
NSN: 5330-00-126-0039
FSC: 5330 — Packing and Gasket Materials
CAGE: 4N908 — MUELLER BRASS CO SUB OF SHARON STEEL CORP AN NVF CO (USA)
SPECIFICATIONS
materialGRAPHITE OVERALL
rim_surface_width0.437 INCHES NOMINAL IN
peripheral_diameter0.800 INCHES NOMINAL IN
center_hole_diameter0.488 INCHES MINIMUM AND 0.493 INCHES MAXIMUM IN
cross-sectional_height0.550 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
NSN5330-00-126-0039
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A17394 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.550 INCHES NOMINAL IN
•
RIM SURFACE WIDTH: 0.437 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 0.800 INCHES NOMINAL IN
•
COLOR: GRAY/GREY
•
CENTER HOLE DIAMETER: 0.488 INCHES MINIMUM AND 0.493 INCHES MAXIMUM IN
•
MATERIAL: GRAPHITE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.550 INCHES NOMINAL IN
RIM SURFACE WIDTH0.437 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER0.800 INCHES NOMINAL IN
COLORGRAY/GREY
CENTER HOLE DIAMETER0.488 INCHES MINIMUM AND 0.493 INCHES MAXIMUM IN
MATERIALGRAPHITE OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
A4620Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy A17394?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A17394?
A17394 is a PACKING,PREFORMED.
What parts can replace A17394?
There is 1 known substitute for A17394: A4620. Substitute compatibility should be verified for your specific system.
What is the NSN for A17394?
A17394 is cataloged in the U.S. Government catalog under NSN 5330-00-126-0039. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A17394