PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A173036
A173036 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FELT,MECHANICAL,PREFORMED is a the manufacturer industrial component. Key specifications include material: WOOL COMP 16R2 OVERALL, outside_diameter: 9.125 INCHES NOMINAL IN, aperture_diameter: 8.125 INCHES NOMINAL IN, cross-sectional_height: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, material_document_and_classification: C-F-206 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-353-2771, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A173036
NSN: 5330-00-353-2771
FSC: 5330
CAGE: 76040 — MACK TRUCKS INC PARTS OPN (USA)
SPECIFICATIONS
materialWOOL COMP 16R2 OVERALL
outside_diameter9.125 INCHES NOMINAL IN
aperture_diameter8.125 INCHES NOMINAL IN
cross-sectional_height0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
material_document_and_classificationC-F-206 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-353-2771
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A173036 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: WOOL COMP 16R2 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: C-F-206 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
APERTURE DIAMETER: 8.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 9.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALWOOL COMP 16R2 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONC-F-206 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
APERTURE DIAMETER8.125 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
OUTSIDE DIAMETER9.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
2116422Interchangeable
interchangeable cross-reference
interchangeable
1025185Interchangeable
interchangeable cross-reference
interchangeable
17545Interchangeable
interchangeable cross-reference
interchangeable
R15366Interchangeable
interchangeable cross-reference
interchangeable
109351Interchangeable
interchangeable cross-reference
interchangeable
245421Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A173036?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A173036?
A173036 is a FELT,MECHANICAL,PREFORMED.
What parts can replace A173036?
There are 9 known substitutes for A173036: 2116422, 1025185, 17545 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A173036?
A173036 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-353-2771. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A173036

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026