PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A1632
A1632 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

PLATE,RETAINING,ELECTRICAL CONNE. Key specifications include material: RUBBER SYNTHETIC OVERALL, head_style: ROUND, head_height: 0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN, overall_width: 0.688 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-010-0957, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A1632
NSN: 5305-00-010-0957
FSC: 5305
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
head_styleROUND
head_height0.107 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN
overall_width0.688 INCHES NOMINAL IN
thread_length0.250 INCHES MAXIMUM IN
aperture_width0.375 INCHES NOMINAL IN
overall_length2.188 INCHES NOMINAL IN
screw_materialCOPPER ALLOY
aperture_length1.750 INCHES NOMINAL IN
fastener_length0.250 INCHES NOMINAL IN
NSN5305-00-010-0957
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: A1632 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
•
INTERNAL DRIVE STYLE: SLOT
•
HEAD STYLE: ROUND
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
•
HEAD DIAMETER: 0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLESLOT
HEAD STYLEROUND
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
HEAD DIAMETER0.287 INCHES MINIMUM AND 0.309 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
THREAD CLASS2A A
THREAD QUANTITY PER INCH32
SCREW MATERIALCOPPER ALLOY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
100957Interchangeable
interchangeable cross-reference
interchangeable
53-10012Interchangeable
interchangeable cross-reference
interchangeable
7026910Interchangeable
interchangeable cross-reference
interchangeable
R5003Interchangeable
interchangeable cross-reference
interchangeable
8125018Interchangeable
interchangeable cross-reference
interchangeable
135-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A1632?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A1632?
A1632 is a PLATE,RETAINING,ELECTRICAL CONNE.
What parts can replace A1632?
There are 14 known substitutes for A1632: 100957, 53-10012, 7026910 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A1632?
A1632 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-010-0957. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A1632

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026