PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A156.16 TYPE B04041 8X10
A156.16 TYPE B04041 8X10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The A156.16 TYPE B04041 8X10 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2339, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A156.16 TYPE B04041 8X10
NSN: 5340-00-240-2339
FSC: 5340
CAGE: 80204 — AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED DBA AMERICAN NATIONAL STANDARDS INSTITUTE (USA)
SPECIFICATIONS
Part NumberA156.16 TYPE B04041 8X10
NSN5340-00-240-2339
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A156.16 TYPE B04041 8X10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG LENGTH: 8.000 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: F1068 TYPE
•
SECOND LEG LENGTH: 10.000 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM
•
SECOND LEG STYLE: END RADIUS AND TAPERED
•
STYLE DESIGNATOR: RIGID
•
FIRST LEG STYLE: END RADIUS AND TAPERED
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG LENGTH8.000 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATAF1068 TYPE
SECOND LEG LENGTH10.000 INCHES NOMINAL IN
SPECIAL FEATURESFURNISHED WITH SCREWS
SURFACE TREATMENTCADMIUM
SECOND LEG STYLEEND RADIUS AND TAPERED
STYLE DESIGNATORRIGID
FIRST LEG STYLEEND RADIUS AND TAPERED
MATERIALSTEEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
BHMA-A156.16 L02032Interchangeable
interchangeable cross-reference
interchangeable
CD7071F8Interchangeable
interchangeable cross-reference
interchangeable
ANSI A156.16 P/N L02032Interchangeable
interchangeable cross-reference
interchangeable
ANSIA156.16L02142Interchangeable
interchangeable cross-reference
interchangeable
BHMA-A156.16 L02142Interchangeable
interchangeable cross-reference
interchangeable
BHMA-A156.16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A156.16 TYPE B04041 8X10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A156.16 TYPE B04041 8X10?
A156.16 TYPE B04041 8X10 is a A156.16 TYPE B04041 8X10.
What parts can replace A156.16 TYPE B04041 8X10?
There are 23 known substitutes for A156.16 TYPE B04041 8X10: BHMA-A156.16 L02032, CD7071F8, ANSI A156.16 P/N L02032 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A156.16 TYPE B04041 8X10?
A156.16 TYPE B04041 8X10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2339. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A156.16 TYPE B04041 8X10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026