PartsTable
Technical Data Sheet
Download PDF

A153926 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A153926: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include rising_pin: NOT INCLUDED, knuckle_type: FRICTION, pin_diameter: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN, overall_length: 84.000 INCHES NOMINAL IN, knuckle_quantity: 42, performance_type: NOT RATED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-155-7982, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A153926
NSN: 5340-01-155-7982
FSC: 5340 — Hardware, Commercial
CAGE: 12472 — LOCKWOOD CORP (USA)
SPECIFICATIONS
rising_pinNOT INCLUDED
knuckle_typeFRICTION
pin_diameter0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
overall_length84.000 INCHES NOMINAL IN
knuckle_quantity42
performance_typeNOT RATED
pin_removabilityREMOVABLE
style_designatorBUTT
material_thickness0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL SURFACE
end_item_identificationW/S: TRUCK, HEAVY EXPANDED MOBILITY TACTICAL (HEMTT); WELDING SHOP, TRAILER MOUNTED (REPLACES LIN Y48323)
NSN5340-01-155-7982
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A153926 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN DIAMETER: 0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
•
REVERSIBLE FEATURE: NOT INCLUDED
•
STYLE DESIGNATOR: BUTT
•
PIN CENTER TO BODY EDGE DISTANCE: 0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
•
HINGE MOUNTING TYPE: FULL SURFACE
•
MATERIAL THICKNESS: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
•
PIN REMOVABILITY: REMOVABLE
TECHNICAL CHARACTERISTICS
PIN DIAMETER0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
REVERSIBLE FEATURENOT INCLUDED
STYLE DESIGNATORBUTT
OVERALL LENGTH84.000 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM IN
HINGE MOUNTING TYPEFULL SURFACE
MATERIAL THICKNESS0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
PIN REMOVABILITYREMOVABLE
KNUCKLE QUANTITY42
END ITEM IDENTIFICATIONW/S: TRUCK, HEAVY EXPANDED MOBILITY TACTICAL (HEMTT); WELDING SHOP, TRAILER MOUNTED (REPLACES LIN Y48323)
SUBSTITUTES & CROSS-REFERENCES 5
2AT842Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
A-A-55594Reference document
Same NSN cross-reference
Reference document — Identification reference
AA55594-16ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS35829-16AReference document
Same NSN cross-reference
Reference document — Secondary reference
AA55594-16Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy A153926?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A153926?
A153926 is a HINGE,BUTT.
What parts can replace A153926?
There are 5 known substitutes for A153926: 2AT842, A-A-55594, AA55594-16A and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A153926?
A153926 is cataloged in the U.S. Government catalog under NSN 5340-01-155-7982. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A153926

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.