PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A14567-3
A14567-3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075, overall_height: 2.704 INCHES NOMINAL IN, end_item_identification: 8470-01-592-6226;HELMET, part_name_assigned_by_controlling_agency: CURVED ECH HELMET BRACKET ASSY. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-665-9638, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A14567-3
NSN: 5340-01-665-9638
FSC: 5340
CAGE: 97427 — GENTEX CORPORATION (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075
overall_height2.704 INCHES NOMINAL IN
end_item_identification8470-01-592-6226;HELMET
part_name_assigned_by_controlling_agencyCURVED ECH HELMET BRACKET ASSY
NSN5340-01-665-9638
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A14567-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: ALUMINUM ALLOY 7075
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT2.704 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYCURVED ECH HELMET BRACKET ASSY
END ITEM IDENTIFICATION8470-01-592-6226;HELMET
MATERIALALUMINUM ALLOY 7075
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
P01483Interchangeable
interchangeable cross-reference
interchangeable
M62217/1-10-BULKInterchangeable
interchangeable cross-reference
interchangeable
1341030Interchangeable
interchangeable cross-reference
interchangeable
136-00-0001Interchangeable
Same NIIN cross-reference
interchangeable
A14567-2Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A14567-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A14567-3?
A14567-3 is a BRACKET,MOUNTING.
What parts can replace A14567-3?
There are 5 known substitutes for A14567-3: P01483, M62217/1-10-BULK, 1341030 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A14567-3?
A14567-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-665-9638. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A14567-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026