PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A14517
A14517 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SPRING,EXPANSION is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360 OVERALL, thickness: 0.062 INCHES NOMINAL IN, hole_diameter: 0.190 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN, overall_diameter: 0.485 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-044-2289, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A14517
NSN: 5310-01-044-2289
FSC: 5310
CAGE: 55635 — DAYTON-GRANGER, INC. (USA)
SPECIFICATIONS
materialCOPPER ALLOY 360 OVERALL
thickness0.062 INCHES NOMINAL IN
hole_diameter0.190 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
overall_diameter0.485 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationQQ-B-626,1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-01-044-2289
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A14517 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: COPPER ALLOY 360 OVERALL
•
HOLE DIAMETER: 0.190 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 0.485 INCHES NOMINAL IN
•
THICKNESS: 0.062 INCHES NOMINAL IN
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALCOPPER ALLOY 360 OVERALL
HOLE DIAMETER0.190 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER0.485 INCHES NOMINAL IN
THICKNESS0.062 INCHES NOMINAL IN
CENTER HOLE SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
14517Interchangeable
interchangeable cross-reference
interchangeable
13181Interchangeable
interchangeable cross-reference
interchangeable
A14517Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A14517?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A14517?
A14517 is a SPRING,EXPANSION.
What parts can replace A14517?
There are 3 known substitutes for A14517: 14517, 13181, A14517. Substitute compatibility should be verified for your specific system.
What is the NSN for A14517?
A14517 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-044-2289. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A14517

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026