PartsTable
Technical Data Sheet
Download PDF

A14059FPB — PLUG,FUSIBLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A14059FPB: PLUG,FUSIBLE.

The PLUG,FUSIBLE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY CASING, core_diameter: 0.172 INCHES NOMINAL IN, usage_location: INSIDE, size_designation: 1/4 INCH IN, features_provided: CORE AND HEAT NUMBER, core_fusing_temp_rating: 275.0 DEG FAHRENHEIT AND 290.0 DEG FAHRENHEIT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-255-6625, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A14059FPB
NSN: 5340-00-255-6625
FSC: 5340 — Hardware, Commercial
CAGE: 41947 — MUELLER BRASS CO. (USA)
SPECIFICATIONS
materialCOPPER ALLOY CASING
core_diameter0.172 INCHES NOMINAL IN
usage_locationINSIDE
size_designation1/4 INCH IN
features_providedCORE AND HEAT NUMBER
core_fusing_temp_rating275.0 DEG FAHRENHEIT AND 290.0 DEG FAHRENHEIT
thread_size_and_series/type_designator1/4-18 NPTF
NSN5340-00-255-6625
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A14059FPB MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORE DIAMETER: 0.172 INCHES NOMINAL IN
•
FEATURES PROVIDED: CORE AND HEAT NUMBER
•
SIZE DESIGNATION: 1/4 INCH IN
•
CORE FUSING TEMP RATING: 275.0 DEG FAHRENHEIT AND 290.0 DEG FAHRENHEIT
•
MATERIAL: COPPER ALLOY CASING
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 1/4-18 NPTF
•
USAGE LOCATION: INSIDE
TECHNICAL CHARACTERISTICS
CORE DIAMETER0.172 INCHES NOMINAL IN
FEATURES PROVIDEDCORE AND HEAT NUMBER
SIZE DESIGNATION1/4 INCH IN
CORE FUSING TEMP RATING275.0 DEG FAHRENHEIT AND 290.0 DEG FAHRENHEIT
MATERIALCOPPER ALLOY CASING
THREAD SIZE AND SERIES/TYPE DESIGNATOR1/4-18 NPTF
USAGE LOCATIONINSIDE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
A14059Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A14059FPB?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A14059FPB?
A14059FPB is a PLUG,FUSIBLE.
What parts can replace A14059FPB?
There is 1 known substitute for A14059FPB: A14059. Substitute compatibility should be verified for your specific system.
What is the NSN for A14059FPB?
A14059FPB is cataloged in the U.S. Government catalog under NSN 5340-00-255-6625. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A14059FPB