The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, vacuum_in_torr: 254.0, connection_type: THREADED INTERNAL TUBE FIRST END, inside_diameter: 0.875 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 4720-00-784-7492, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
A1332-16S37
NSN:4720-00-784-7492 FSC:4720 — Hose and Flexible Tubing CAGE:01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
seat_angle
37.0 DEGREES FIRST END
temp_rating
-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class
2B FIRST END
vacuum_in_torr
254.0
connection_type
THREADED INTERNAL TUBE FIRST END
inside_diameter
0.875 INCHES NOMINAL IN
connection_style
INVERTED FLARE SECOND END
outside_diameter
1.234 INCHES NOMINAL IN
thread_direction
RIGHT-HAND FIRST END
features_provided
ELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS
operating_pressure
800.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure
3200.0 POUNDS PER SQUARE INCH LBS
NSN
4720-00-784-7492
COMPONENT DIAGRAM
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 37.000 INCHES NOMINAL OVERALL IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
MINIMUM INSIDE BENDING RADIUS: 7.375 INCHES IN
•
CONNECTION STYLE: INVERTED FLARE SECOND END
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
VACUUM IN TORR: 254.0
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH
37.000 INCHES NOMINAL OVERALL IN
TEMP RATING
-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE DEGF
MINIMUM INSIDE BENDING RADIUS
7.375 INCHES IN
CONNECTION STYLE
INVERTED FLARE SECOND END
CONNECTION STYLE
SWIVEL NUT FLARE FIRST END
END CONNECTION DESIGN
STRAIGHT FIRST END
END CONNECTION DESIGN
STRAIGHT SECOND END
VACUUM IN TORR
254.0
LAYER COMPOSITION AND LOCATION
1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC
CONNECTION TYPE
THREADED EXTERNAL PIPE SECOND END
OTHER ITEMS IN FSC 4720 — Hose and Flexible Tubing
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A1332-16S37?
A1332-16S37 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace A1332-16S37?
There are 4 known substitutes for A1332-16S37: 3W58789T6, M200106-16-16-16-37, M2010106-16-16-16-37 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A1332-16S37?
A1332-16S37 is cataloged in the U.S. Government catalog under NSN 4720-00-784-7492. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.