PartsTable
Technical Data Sheet
PartsTable / O-RING / A132R124
A132R124 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.425 INCHES MINIMUM AND 1.461 INCHES MAXIMUM IN, center_hole_diameter: 1.231 INCHES MINIMUM AND 1.243 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-845-9685, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A132R124
NSN: 5331-00-845-9685
FSC: 5331 — O-RING
CAGE: 98939 — AEROCONTROLEX GROUP, INC. DBA AERO FLUID PRODUCTS (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter1.425 INCHES MINIMUM AND 1.461 INCHES MAXIMUM IN
center_hole_diameter1.231 INCHES MINIMUM AND 1.243 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-845-9685
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A132R124 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 1.425 INCHES MINIMUM AND 1.461 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.231 INCHES MINIMUM AND 1.243 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER1.425 INCHES MINIMUM AND 1.461 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.231 INCHES MINIMUM AND 1.243 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
30807268PC24Interchangeable
interchangeable cross-reference
interchangeable
P0642 2-124Interchangeable
interchangeable cross-reference
interchangeable
5331PL1281979Interchangeable
interchangeable cross-reference
interchangeable
4400171-1240Interchangeable
interchangeable cross-reference
interchangeable
12Z9026-24Interchangeable
interchangeable cross-reference
interchangeable
J200A124Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy A132R124?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A132R124?
A132R124 is a O-RING.
What parts can replace A132R124?
There are 20 known substitutes for A132R124: 30807268PC24, P0642 2-124, 5331PL1281979 and 17 more. Substitute compatibility should be verified for your specific system.
Is A132R124 still available?
A132R124 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A132R124

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026