PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A125-2
A125-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TEE,TUBE is a the manufacturer industrial component. Key specifications include end_item_identification: TRUCK TRACTOR CR302D00, NSN 2320-01-452-5579, part_name_assigned_by_controlling_agency: ANCHOR,TEE,OIL PRESSURE AND HI-LO WARNING SENDER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-773-5843, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A125-2
NSN: 5330-00-773-5843
FSC: 5330
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
end_item_identificationTRUCK TRACTOR CR302D00, NSN 2320-01-452-5579
part_name_assigned_by_controlling_agencyANCHOR,TEE,OIL PRESSURE AND HI-LO WARNING SENDER
NSN5330-00-773-5843
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A125-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ES6800 OLIVE DRAB FSCM 87990 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: PAINT OVERALL
•
MATERIAL: STEEL COMP 1012 OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
CENTER HOLE DIAMETER: 0.750 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.438 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONES6800 OLIVE DRAB FSCM 87990 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPAINT OVERALL
MATERIALSTEEL COMP 1012 OVERALL
CROSS-SECTIONAL SHAPE STYLECUP
CENTER HOLE DIAMETER0.750 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.438 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
PERIPHERAL DIAMETER1.266 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
14409Interchangeable
interchangeable cross-reference
interchangeable
14B409Interchangeable
interchangeable cross-reference
interchangeable
23991Interchangeable
interchangeable cross-reference
interchangeable
871-803-001-600Interchangeable
interchangeable cross-reference
interchangeable
14409-103Interchangeable
interchangeable cross-reference
interchangeable
93-11-15-21 DEInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A125-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A125-2?
A125-2 is a TEE,TUBE.
What parts can replace A125-2?
There are 10 known substitutes for A125-2: 14409, 14B409, 23991 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A125-2?
A125-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-773-5843. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A125-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026