PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A1208PC8
A1208PC8 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.062 INCHES NOMINAL IN, hole_diameter: 0.422 INCHES NOMINAL IN, overall_diameter: 1.500 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-213-0347, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A1208PC8
NSN: 5310-00-213-0347
FSC: 5310
CAGE: 71871 — ALFA LAVAL INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.062 INCHES NOMINAL IN
hole_diameter0.422 INCHES NOMINAL IN
overall_diameter1.500 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-213-0347
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A1208PC8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.422 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
THICKNESS: 0.062 INCHES NOMINAL IN
•
OVERALL DIAMETER: 1.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.422 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
THICKNESS0.062 INCHES NOMINAL IN
OVERALL DIAMETER1.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
19658Interchangeable
interchangeable cross-reference
interchangeable
25655Interchangeable
interchangeable cross-reference
interchangeable
5044T86P01Interchangeable
interchangeable cross-reference
interchangeable
01978Interchangeable
interchangeable cross-reference
interchangeable
B107.48Interchangeable
interchangeable cross-reference
interchangeable
STP J86A5/8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A1208PC8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A1208PC8?
A1208PC8 is a WASHER,FLAT.
What parts can replace A1208PC8?
There are 16 known substitutes for A1208PC8: 19658, 25655, 5044T86P01 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A1208PC8?
A1208PC8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-213-0347. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A1208PC8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026