PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A1205K167
A1205K167 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, outside_diameter: 2.378 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 2.374 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-1346, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A1205K167
NSN: 5330-00-285-1346
FSC: 5330
CAGE: 08820 — BROS INC
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.500 INCHES NOMINAL IN
outside_diameter2.378 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter2.374 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.375 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-285-1346
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A1205K167 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
HOUSING BORE DIAMETER: 2.374 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.378 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3000 FEET PER MINUTE FT
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
HOUSING BORE DIAMETER2.374 INCHES NOMINAL IN
OUTSIDE DIAMETER2.378 INCHES NOMINAL IN
MATERIALSTEEL CASE
SURFACE TREATMENTPLASTIC CASE
SEALING ELEMENT STYLEANGULAR
SEAL WIDTH0.500 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
13738Interchangeable
interchangeable cross-reference
interchangeable
CH-7402K3Interchangeable
interchangeable cross-reference
interchangeable
7402Interchangeable
interchangeable cross-reference
interchangeable
152023C-2Interchangeable
interchangeable cross-reference
interchangeable
689Interchangeable
interchangeable cross-reference
interchangeable
DD5276Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy A1205K167?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A1205K167?
A1205K167 is a SEAL,PLAIN ENCASED.
What parts can replace A1205K167?
There are 27 known substitutes for A1205K167: 13738, CH-7402K3, 7402 and 24 more. Substitute compatibility should be verified for your specific system.
Is A1205K167 still available?
A1205K167 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A1205K167

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026