A11B106J — CAPACITOR,FIXED,METALLIZED,PAPER

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

A11B106J: CAPACITOR,FIXED,METALLIZED,PAPER.

CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include material: PLASTIC CASE, body_style: W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES, body_width: 0.460 INCHES NOMINAL IN, body_height: 0.630 INCHES NOMINAL IN, body_length: 1.170 INCHES NOMINAL IN, terminal_length: 2.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-01-111-1302, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ A11B106J

NSN: 5910-01-111-1302
FSC: 5910 — Capacitors
CAGE: 58518 — BISHOP ELECTRONICS INC (USA)

SPECIFICATIONS

material	PLASTIC CASE
body_style	W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
body_width	0.460 INCHES NOMINAL IN
body_height	0.630 INCHES NOMINAL IN
body_length	1.170 INCHES NOMINAL IN
terminal_length	2.000 INCHES NOMINAL IN
terminal_diameter	0.032 INCHES NOMINAL IN
reliability_indicator	NOT ESTABLISHED
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
tolerance_range_per_section	-5.00 TO 5.00 PERCENT SINGLE SECTION
NSN	5910-01-111-1302

COMPONENT DIAGRAM

KEY FEATURES

•

TERMINAL DIAMETER: 0.032 INCHES NOMINAL IN

•

BODY STYLE: W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES

•

TOLERANCE RANGE PER SECTION: -5.00 TO 5.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 2.000 INCHES NOMINAL IN

•

BODY WIDTH: 0.460 INCHES NOMINAL IN

•

BODY HEIGHT: 0.630 INCHES NOMINAL IN

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

TERMINAL DIAMETER	0.032 INCHES NOMINAL IN
BODY STYLE	W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES
TOLERANCE RANGE PER SECTION	-5.00 TO 5.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	2.000 INCHES NOMINAL IN
BODY WIDTH	0.460 INCHES NOMINAL IN
BODY HEIGHT	0.630 INCHES NOMINAL IN
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	100.0 DC SINGLE SECTION
SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)

SUBSTITUTES & CROSS-REFERENCES 2

XA2B106JReference document

Same NSN cross-reference

Reference document — Secondary reference

230B1B106-KReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy A11B106J?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is A11B106J?

A11B106J is a CAPACITOR,FIXED,METALLIZED,PAPER. It is classified as a MRO (MRO_GENERAL).

What parts can replace A11B106J?

There are 2 known substitutes for A11B106J: XA2B106J, 230B1B106-K. Substitute compatibility should be verified for your specific system.

What is the NSN for A11B106J?

A11B106J is cataloged in the U.S. Government catalog under NSN 5910-01-111-1302. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

A11B106J — CAPACITOR,FIXED,METALLIZED,PAPER

Request a Quote — A11B106J