PartsTable
Technical Data Sheet
Download PDF

A1183-4 — DESICCANT,ACTIVATED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A1183-4: DESICCANT,ACTIVATED.

The DESICCANT,ACTIVATED is a the manufacturer industrial component. Key specifications include height: 0.255 INCHES NOMINAL IN, length: 0.173 INCHES NOMINAL IN, material: ALUMINUM, hole_diameter: 0.116 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN, furnished_items: LOCKNUT. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-760-5724, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A1183-4
NSN: 5340-00-760-5724
NIINs: 007605724, 009673418
FSC: 5340 — Hardware, Commercial
CAGE: 08242 — ALLEN-BRADLEY CO ENCODER PRODUCTS UNIT INDUSTRIAL CONTROL DIV (USA)
SPECIFICATIONS
height0.255 INCHES NOMINAL IN
length0.173 INCHES NOMINAL IN
materialALUMINUM
hole_diameter0.116 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
furnished_itemsLOCKNUT
NSN5340-00-760-5724
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A1183-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.173 INCHES NOMINAL IN
•
HEIGHT: 0.255 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM
•
FURNISHED ITEMS: LOCKNUT
•
HOLE DIAMETER: 0.116 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LENGTH0.173 INCHES NOMINAL IN
HEIGHT0.255 INCHES NOMINAL IN
MATERIALALUMINUM
FURNISHED ITEMSLOCKNUT
HOLE DIAMETER0.116 INCHES MINIMUM AND 0.121 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
MFS2-2Same NSN cross-reference
Mfs22
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A1183-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A1183-4?
A1183-4 is a DESICCANT,ACTIVATED.
What parts can replace A1183-4?
There is 1 known substitute for A1183-4: MFS2-2. Substitute compatibility should be verified for your specific system.
What is the NSN for A1183-4?
A1183-4 is cataloged in the U.S. Government catalog under NSN 5340-00-760-5724. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A1183-4