PartsTable
Technical Data Sheet
Download PDF

A11586-1 — ARM,DOOR STOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A11586-1: ARM,DOOR STOP.

The ARM,DOOR STOP is a the manufacturer industrial component. Key specifications include mounting_method: BOLT, special_features: FORMER NAME: HINGE,(R.H.), mounting_hole_type: UNTHREADED, functional_description: LABELLED AS A HINGE IN T.O., end_item_identification: PUMP COMPARTMENT, part_name_assigned_by_controlling_agency: HINGE - TABLE LEG (R.H.). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-193-9042, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A11586-1
NSN: 5340-01-193-9042
FSC: 5340 — Hardware, Commercial
CAGE: 23834 — ELLIOTT MACHINE WORKS INC (USA)
SPECIFICATIONS
mounting_methodBOLT
special_featuresFORMER NAME: HINGE,(R.H.)
mounting_hole_typeUNTHREADED
functional_descriptionLABELLED AS A HINGE IN T.O.
end_item_identificationPUMP COMPARTMENT
part_name_assigned_by_controlling_agencyHINGE - TABLE LEG (R.H.)
NSN5340-01-193-9042
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A11586-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: WHILE THE DRAWING AND THE T.O. LABELS IT A HINGE, THE HINGES ACTUALLY APPEARS TO BE INTEGRAL TO THE DOORS, AND THIS ITEM ONLY SERVES TO LIMIT THE RANGE OF MOTION OF A DOOR AND LOCK IT IN A FIXED POSITION WHEN FULLY EXTENDED. THE DOORS ARE NOT SUPPORTED NOR THE PIVOT DETERMINED BY THIS HARDWARE ITEM.
•
MOUNTING METHOD: BOLT
•
FUNCTIONAL DESCRIPTION: LABELLED AS A HINGE IN T.O.
•
MOUNTING HOLE TYPE: UNTHREADED
TECHNICAL CHARACTERISTICS
GENERAL CHARACTERISTICS ITEM DESCRIPTIONWHILE THE DRAWING AND THE T.O. LABELS IT A HINGE, THE HINGES ACTUALLY APPEARS TO BE INTEGRAL TO THE DOORS, AND THIS ITEM ONLY SERVES TO LIMIT THE RANGE OF MOTION OF A DOOR AND LOCK IT IN A FIXED POSITION WHEN FULLY EXTENDED. THE DOORS ARE NOT SUPPORTED NOR THE PIVOT DETERMINED BY THIS HARDWARE ITEM.
MOUNTING METHODBOLT
SPECIAL FEATURESFORMER NAME: HINGE,(R.H.)
FUNCTIONAL DESCRIPTIONLABELLED AS A HINGE IN T.O.
PART NAME ASSIGNED BY CONTROLLING AGENCYHINGE - TABLE LEG (R.H.)
END ITEM IDENTIFICATIONPUMP COMPARTMENT
MOUNTING HOLE TYPEUNTHREADED
SUBSTITUTES & CROSS-REFERENCES 1
A11586Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A11586-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A11586-1?
A11586-1 is a ARM,DOOR STOP.
What parts can replace A11586-1?
There is 1 known substitute for A11586-1: A11586. Substitute compatibility should be verified for your specific system.
What is the NSN for A11586-1?
A11586-1 is cataloged in the U.S. Government catalog under NSN 5340-01-193-9042. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A11586-1