A11330-4-3 — NUT,CLIP-ON

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

A11330-4-3: NUT,CLIP-ON.

The NUT,CLIP-ON is a the manufacturer industrial component. Key specifications include material: STEEL NUT, nut_style: FLOATINGFLOATING, lubrication: DRY FILM LUBRICANTDRY FILM LUBRICANT, temp_rating: 45.0 FAHRENHEIT MAXIMUM45.0 FAHRENHEIT MAXIMUM DEGF, thread_class: 3B3B, overall_width: 0.500 INCHES MAXIMUM0.500 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-196-0243, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

A11330-4-3

NSN: 5310-01-196-0243
FSC: 5310 — Nuts and Washers
CAGE: 72962 — HARVARD INDUSTRIES INC (USA)

SPECIFICATIONS

material	STEEL NUT
nut_style	FLOATINGFLOATING
lubrication	DRY FILM LUBRICANTDRY FILM LUBRICANT
temp_rating	45.0 FAHRENHEIT MAXIMUM45.0 FAHRENHEIT MAXIMUM DEGF
thread_class	3B3B
overall_width	0.500 INCHES MAXIMUM0.500 INCHES MAXIMUM IN
thread_series	UNIFIED NATIONAL JOINT FINE (UNJF)UNIFIED NATIONAL JOINT FINE (UNJF)
hardness_rating	46.0 ROCKWELL C MAXIMUM46.0 ROCKWELL C MAXIMUM
locking_feature	PREVAILING TORQUE ALL METAL DESIGNPREVAILING TORQUE ALL METAL DESIGN
panel_thickness	0.170 INCHES MINIMUM0.170 INCHES MINIMUM IN
thread_direction	RIGHT-HANDRIGHT-HAND
surface_treatment	CADMIUM AND CHROMATE CLIP
NSN	5310-01-196-0243

COMPONENT DIAGRAM

KEY FEATURES

•

LUBRICATION: DRY FILM LUBRICANTDRY FILM LUBRICANT

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT

•

THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)UNIFIED NATIONAL JOINT FINE (UNJF)

•

TEMP RATING: 45.0 FAHRENHEIT MAXIMUM45.0 FAHRENHEIT MAXIMUM DEGF

•

HARDNESS RATING: 46.0 ROCKWELL C MAXIMUM46.0 ROCKWELL C MAXIMUM

•

DISTANCE FROM BASE TO CENTER OF APERTURE: 0.250 INCHES MINIMUM AND 0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM0.280 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

LUBRICATION	DRY FILM LUBRICANTDRY FILM LUBRICANT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 1 FED SPEC SINGLE TREATMENT RESPONSE CLIP
THREAD SERIES	UNIFIED NATIONAL JOINT FINE (UNJF)UNIFIED NATIONAL JOINT FINE (UNJF)
TEMP RATING	45.0 FAHRENHEIT MAXIMUM45.0 FAHRENHEIT MAXIMUM DEGF
HARDNESS RATING	46.0 ROCKWELL C MAXIMUM46.0 ROCKWELL C MAXIMUM
DISTANCE FROM BASE TO CENTER OF APERTURE	0.250 INCHES MINIMUM AND 0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM0.280 INCHES MAXIMUM IN
OVERALL WIDTH	0.500 INCHES MAXIMUM0.500 INCHES MAXIMUM IN
THREAD DIRECTION	RIGHT-HANDRIGHT-HAND
PANEL THICKNESS	0.170 INCHES MINIMUM0.170 INCHES MINIMUM IN

SUBSTITUTES & CROSS-REFERENCES 2

10110128Reference document

Same NSN cross-reference

Reference document — Informative reference only

BACN10FX14Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy A11330-4-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is A11330-4-3?

A11330-4-3 is a NUT,CLIP-ON.

What parts can replace A11330-4-3?

There are 2 known substitutes for A11330-4-3: 10110128, BACN10FX14. Substitute compatibility should be verified for your specific system.

What is the NSN for A11330-4-3?

A11330-4-3 is cataloged in the U.S. Government catalog under NSN 5310-01-196-0243. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

A11330-4-3 — NUT,CLIP-ON

Request a Quote — A11330-4-3