PartsTable
Technical Data Sheet
Download PDF

A113-1-2E — BOLT,SHEAR

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

A113-1-2E: BOLT,SHEAR.

The BOLT,SHEAR is a the manufacturer industrial component. Key specifications include special_features: PART OF HAWKER 800XP/850XP; FAIRING INSTL-LANDING GEAR; RAYTHEON AIRCRAFT COMPANY; 53-20-30-20 ITEM 115, end_item_identification: HAWKER 800XP/850XP, part_name_assigned_by_controlling_agency: NOMENCLATURE: BOLT. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-453-1488, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A113-1-2E
NSN: 5305-00-453-1488
NIINs: 004531488, 016479171
FSC: 5305 — Screws
CAGE: K7766 — BSI STANDARDS LIMITED (GBR)
SPECIFICATIONS
special_featuresPART OF HAWKER 800XP/850XP; FAIRING INSTL-LANDING GEAR; RAYTHEON AIRCRAFT COMPANY; 53-20-30-20 ITEM 115
end_item_identificationHAWKER 800XP/850XP
part_name_assigned_by_controlling_agencyNOMENCLATURE: BOLT
NSN5305-00-453-1488
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: A113-1-2E · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.133 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.650 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: A.113,FSCM K7766 NATIONAL SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.599 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: BUTTON
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.133 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.650 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONA.113,FSCM K7766 NATIONAL SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.599 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEBUTTON
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLESLOT
SUBSTITUTES & CROSS-REFERENCES 1
99-9415678Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy A113-1-2E?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A113-1-2E?
A113-1-2E is a BOLT,SHEAR.
What parts can replace A113-1-2E?
There is 1 known substitute for A113-1-2E: 99-9415678. Substitute compatibility should be verified for your specific system.
What is the NSN for A113-1-2E?
A113-1-2E is cataloged in the U.S. Government catalog under NSN 5305-00-453-1488. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A113-1-2E