A10W2-5K — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

A10W2-5K: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: RECTANGULAR W/MOUNTING HOLES/SLOTS, body_width: 0.190 INCHES NOMINAL IN, body_height: 0.310 INCHES NOMINAL IN, body_length: 1.250 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.070 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-688-5449, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ A10W2-5K

NSN: 5905-00-688-5449
FSC: 5905 — Resistor
CAGE: 91637 — VISHAY DALE ELECTRONICS, LLC DIV VISHAY AMERICAS (USA)

SPECIFICATIONS

body_style	RECTANGULAR W/MOUNTING HOLES/SLOTS
body_width	0.190 INCHES NOMINAL IN
body_height	0.310 INCHES NOMINAL IN
body_length	1.250 INCHES NOMINAL IN
shaft_style	ROUND, SLOTTED
shaft_length	0.070 INCHES NOMINAL IN
actuator_type	SINGLE SHAFT
shaft_diameter	0.110 INCHES NOMINAL IN
mounting_method	UNTHREADED HOLE(S)
section_quantity	1
features_provided	NONMETALLIC SHAFT
terminal_location	REAR END LOCATION NOT OTHERWISE SPECIFIED
NSN	5905-00-688-5449

COMPONENT DIAGRAM

KEY FEATURES

•

ELECTRICAL RESISTANCE PER SECTION: 2.500 KILOHMS SINGLE SECTION

•

AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 175.0 SINGLE SECTION

•

SECTION QUANTITY: 1

•

MOUNTING FACILITY QUANTITY: 2

•

SHAFT DIAMETER: 0.110 INCHES NOMINAL IN

•

BODY STYLE: RECTANGULAR W/MOUNTING HOLES/SLOTS

•

MOUNTING METHOD: UNTHREADED HOLE(S)

•

BODY WIDTH: 0.190 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

ELECTRICAL RESISTANCE PER SECTION	2.500 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	175.0 SINGLE SECTION
SECTION QUANTITY	1
MOUNTING FACILITY QUANTITY	2
SHAFT DIAMETER	0.110 INCHES NOMINAL IN
BODY STYLE	RECTANGULAR W/MOUNTING HOLES/SLOTS
MOUNTING METHOD	UNTHREADED HOLE(S)
BODY WIDTH	0.190 INCHES NOMINAL IN
BODY HEIGHT	0.310 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER	0.086 INCHES MINIMUM IN

OTHER ITEMS IN FSC 5905 — Resistor

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059

SUBSTITUTES & CROSS-REFERENCES 4

ES1384-9Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

944235-0622Reference document

Same NSN cross-reference

Reference document — Secondary reference

224S1-252Reference document

Same NSN cross-reference

Reference document — Secondary reference

900401-2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy A10W2-5K?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is A10W2-5K?

A10W2-5K is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).

What parts can replace A10W2-5K?

There are 4 known substitutes for A10W2-5K: ES1384-9, 944235-0622, 224S1-252 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for A10W2-5K?

A10W2-5K is cataloged in the U.S. Government catalog under NSN 5905-00-688-5449. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

A10W2-5K — RESISTOR,VARIABLE,WIRE WOUND,NON

Request a Quote — A10W2-5K