PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A109005-101-11, ITEM 10
A109005-101-11, ITEM 10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The A109005-101-11, ITEM 10 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-510-0474, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A109005-101-11, ITEM 10
NSN: 5330-01-510-0474
FSC: 5330
CAGE: 1BQ03 — GENERAL DYNAMICS ADV INFO SYS (USA)
SPECIFICATIONS
Part NumberA109005-101-11, ITEM 10
NSN5330-01-510-0474
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A109005-101-11, ITEM 10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 160.000 MILLIMETERS NOMINAL MM
•
ACCOMMODATED SHAFT DIAMETER: 135.000 MILLIMETERS NOMINAL MM
•
SEAL WIDTH: 12.000 MILLIMETERS NOMINAL MM
•
OUTSIDE DIAMETER: 160.4 MILLIMETERS NOMINAL MM
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3600 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER160.000 MILLIMETERS NOMINAL MM
ACCOMMODATED SHAFT DIAMETER135.000 MILLIMETERS NOMINAL MM
SEAL WIDTH12.000 MILLIMETERS NOMINAL MM
OUTSIDE DIAMETER160.4 MILLIMETERS NOMINAL MM
ACCOMMODATED SHAFT MAXIMUM RATED SPEED3600 FEET PER MINUTE FT
END ITEM IDENTIFICATIONGEARBOX ASSY
CASE STYLESQUARE
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL SEALING ELEMENT
MATERIALSTEEL COMP 302 SPRING
PART NAME ASSIGNED BY CONTROLLING AGENCYRADIAL SEAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
5313-5Interchangeable
interchangeable cross-reference
interchangeable
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
2410 35/64Interchangeable
interchangeable cross-reference
interchangeable
EE45626Interchangeable
interchangeable cross-reference
interchangeable
MS35335-35Interchangeable
interchangeable cross-reference
interchangeable
93610-822Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A109005-101-11, ITEM 10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A109005-101-11, ITEM 10?
A109005-101-11, ITEM 10 is a A109005-101-11, ITEM 10.
What parts can replace A109005-101-11, ITEM 10?
There are 9 known substitutes for A109005-101-11, ITEM 10: 5313-5, B94.11M, 2410 35/64 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A109005-101-11, ITEM 10?
A109005-101-11, ITEM 10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-510-0474. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A109005-101-11, ITEM 10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026