PartsTable
Technical Data Sheet
Download PDF

A10788 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

A10788: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL UNS K08500 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDSSPRING END,SQUARED AND GROUND BOTH ENDS, body_style: CYLINDRICAL SERVO MOUNTED, body_length: 0.781 INCHES MAXIMUM IN, shaft_style: ROUND, SLOTTED, pilot_length: 0.0620 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-053-3076, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ A10788
NSN: 5905-00-053-3076
NIINs: 000533076, 001054043, 005140209
FSC: 5905 — Resistor
CAGE: 93322 — GE AVIATION SYSTEMS LLC DBA GE AVIATION (USA)
SPECIFICATIONS
materialSTEEL UNS K08500 OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDSSPRING END,SQUARED AND GROUND BOTH ENDS
body_styleCYLINDRICAL SERVO MOUNTED
body_length0.781 INCHES MAXIMUM IN
shaft_styleROUND, SLOTTED
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.281 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter0.875 INCHES NOMINAL IN
bore_diameter0.390 INCHES NOMINAL0.390 INCHES NOMINAL IN
coil_quantity8-1/28-1/2
overall_length1.124 INCHES NOMINAL IN
NSN5905-00-053-3076
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN A10788 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 0.10 INCH-OUNCES IN
•
BODY DIAMETER: 0.875 INCHES NOMINAL IN
•
ELECTRICAL RESISTANCE PER SECTION: 1.0 KILOHMS SINGLE SECTION
•
MOUNTING LIP DEPTH: 0.0620 INCHES NOMINAL IN
•
UNDERCUT WIDTH: 0.0570 INCHES MINIMUM IN
•
SECTION QUANTITY: 1
•
SHAFT DIAMETER: 0.1246 INCHES MINIMUM AND 0.1249 INCHES MAXIMUM IN
•
UNDERCUT DIAMETER: 0.781 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE0.10 INCH-OUNCES IN
BODY DIAMETER0.875 INCHES NOMINAL IN
ELECTRICAL RESISTANCE PER SECTION1.0 KILOHMS SINGLE SECTION
MOUNTING LIP DEPTH0.0620 INCHES NOMINAL IN
UNDERCUT WIDTH0.0570 INCHES MINIMUM IN
SECTION QUANTITY1
SHAFT DIAMETER0.1246 INCHES MINIMUM AND 0.1249 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.781 INCHES MAXIMUM IN
BODY STYLECYLINDRICAL SERVO MOUNTED
SHAFT END PLAY0.004 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 1
1200-623-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy A10788?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A10788?
A10788 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace A10788?
There is 1 known substitute for A10788: 1200-623-1. Substitute compatibility should be verified for your specific system.
What is the NSN for A10788?
A10788 is cataloged in the U.S. Government catalog under NSN 5905-00-053-3076. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A10788

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.