PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A10630
A10630 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The SYNCHRO,CONTROL TRANSFORMER is a the manufacturer industrial component. Key specifications include length: 0.2500 INCHES NOMINAL SHOULDER IN, material: STEEL CORROSION RESISTING BODY, body_size: 23, thickness: 0.016 INCHES NOMINAL IN, body_style: STANDARD ROUND D, shaft_type: SPLINE W/THREADS SINGLE SHAFT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-599-4852, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A10630
NSN: 5310-00-599-4852
FSC: 5310
CAGE: 36251 — MCNEIL OHIO CORP (USA)
SPECIFICATIONS
length0.2500 INCHES NOMINAL SHOULDER IN
materialSTEEL CORROSION RESISTING BODY
body_size23
thickness0.016 INCHES NOMINAL IN
body_styleSTANDARD ROUND D
shaft_typeSPLINE W/THREADS SINGLE SHAFT
pilot_length0.0360 INCHES MINIMUM AND 0.0460 INCHES MAXIMUM IN
shaft_length0.7190 INCHES MAXIMUM SINGLE SHAFT IN
body_diameter1.9850 INCHES MINIMUM AND 1.9900 INCHES MAXIMUM IN
hole_diameter0.562 INCHES NOMINAL IN
overall_width0.422 INCHES NOMINAL IN
overall_height0.625 INCHES NOMINAL IN
NSN5310-00-599-4852
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A10630 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
MATERIAL: COPPER OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
CENTER HOLE SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 0.750 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.562 INCHES NOMINAL IN
•
THICKNESS: 0.016 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
MATERIALCOPPER OVERALL
PERIPHERAL SHAPE STYLEROUND
CENTER HOLE SHAPE STYLEROUND
OVERALL DIAMETER0.750 INCHES NOMINAL IN
HOLE DIAMETER0.562 INCHES NOMINAL IN
THICKNESS0.016 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
31410ITEM7Interchangeable
interchangeable cross-reference
interchangeable
8593Interchangeable
interchangeable cross-reference
interchangeable
PX886Interchangeable
interchangeable cross-reference
interchangeable
31167Interchangeable
interchangeable cross-reference
interchangeable
B10065Interchangeable
interchangeable cross-reference
interchangeable
23CT6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy A10630?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A10630?
A10630 is a SYNCHRO,CONTROL TRANSFORMER.
What parts can replace A10630?
There are 9 known substitutes for A10630: 31410ITEM7, 8593, PX886 and 6 more. Substitute compatibility should be verified for your specific system.
Is A10630 still available?
A10630 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A10630

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026