PartsTable
Technical Data Sheet
Download PDF

A102-1B — BOLT,SHEAR

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

A102-1B: BOLT,SHEAR.

The BOLT,SHEAR is a the manufacturer industrial component. Key specifications include end_item_identification: AERIAL INSTL, part_name_assigned_by_controlling_agency: BOLT. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-452-4883, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A102-1B
NSN: 5305-00-452-4883
NIINs: 004524883, 016490509
FSC: 5305 — Screws
CAGE: K7766 — BSI STANDARDS LIMITED (GBR)
SPECIFICATIONS
end_item_identificationAERIAL INSTL
part_name_assigned_by_controlling_agencyBOLT
NSN5305-00-452-4883
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: A102-1B · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.500 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.307 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
FASTENER LENGTH0.500 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
THREAD LENGTH0.307 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.245 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SCREW MATERIALSTEEL
THREAD CLASS2A A
THREAD QUANTITY PER INCH32
SUBSTITUTES & CROSS-REFERENCES 1
99-9419560Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy A102-1B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A102-1B?
A102-1B is a BOLT,SHEAR.
What parts can replace A102-1B?
There is 1 known substitute for A102-1B: 99-9419560. Substitute compatibility should be verified for your specific system.
What is the NSN for A102-1B?
A102-1B is cataloged in the U.S. Government catalog under NSN 5305-00-452-4883. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A102-1B

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.