PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A1011A
A1011A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DISTILLING APPARATUS is a the manufacturer industrial component. Key specifications include general_characteristics_item_description: ELECTRICALLY HEATED,115 V,AC,50/60HZ,LOW WATER CUTOFF,1 GL CAPACITY V. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-214-3931, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A1011A
NSN: 5330-00-214-3931
FSC: 5330
CAGE: 93343 — WHITE FARM EQUIPMENT CO SUB OF TIC INVESTMENT CORP
SPECIFICATIONS
general_characteristics_item_descriptionELECTRICALLY HEATED,115 V,AC,50/60HZ,LOW WATER CUTOFF,1 GL CAPACITY V
NSN5330-00-214-3931
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A1011A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: PAPER OVERALL
•
BOLT CIRCLE DIAMETER: 6.875 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH8.062 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIALPAPER OVERALL
BOLT CIRCLE DIAMETER6.875 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
472015Interchangeable
interchangeable cross-reference
interchangeable
137-0085-070Interchangeable
interchangeable cross-reference
interchangeable
155314Interchangeable
interchangeable cross-reference
interchangeable
A1011-AInterchangeable
interchangeable cross-reference
interchangeable
A1011Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A1011A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A1011A?
A1011A is a DISTILLING APPARATUS.
What parts can replace A1011A?
There are 5 known substitutes for A1011A: 472015, 137-0085-070, 155314 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A1011A?
A1011A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-214-3931. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A1011A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026