PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A1-43-32 FIGURE 01 ITEM 085
A1-43-32 FIGURE 01 ITEM 085 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include special_features: FUEL SPRAY NOZZLE TO COMB CASE, end_item_identification: ENGINE, GAS TURBINE, part_name_assigned_by_controlling_agency: SEAL, FACE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-614-9346, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A1-43-32 FIGURE 01 ITEM 085
NSN: 5330-01-614-9346
FSC: 5330
CAGE: 07309 — BIRD-JOHNSON PROPELLER COMPANY, LLC (USA)
SPECIFICATIONS
special_featuresFUEL SPRAY NOZZLE TO COMB CASE
end_item_identificationENGINE, GAS TURBINE
part_name_assigned_by_controlling_agencySEAL, FACE
NSN5330-01-614-9346
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A1-43-32 FIGURE 01 ITEM 085 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TECHNICAL CHARACTERISTICS (FLIS)
PART NAME ASSIGNED BY CONTROLLING AGENCYSEAL, FACE
SPECIAL FEATURESFUEL SPRAY NOZZLE TO COMB CASE
END ITEM IDENTIFICATIONENGINE, GAS TURBINE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
SE-5563UInterchangeable
interchangeable cross-reference
interchangeable
BMS1-57Interchangeable
interchangeable cross-reference
interchangeable
S-2557Interchangeable
interchangeable cross-reference
interchangeable
74054433Interchangeable
interchangeable cross-reference
interchangeable
1806929C91Interchangeable
interchangeable cross-reference
interchangeable
SM-A-680088-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy A1-43-32 FIGURE 01 ITEM 085?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A1-43-32 FIGURE 01 ITEM 085?
A1-43-32 FIGURE 01 ITEM 085 is a PACKING,PREFORMED.
What parts can replace A1-43-32 FIGURE 01 ITEM 085?
There are 11 known substitutes for A1-43-32 FIGURE 01 ITEM 085: SE-5563U, BMS1-57, S-2557 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for A1-43-32 FIGURE 01 ITEM 085?
A1-43-32 FIGURE 01 ITEM 085 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-614-9346. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A1-43-32 FIGURE 01 ITEM 085

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026