PartsTable
Technical Data Sheet
Download PDF

A1-05-0411 — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

A1-05-0411: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include width: 0.750 INCHES NOMINAL IN, height: 0.250 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING LEVER, design_type: CLAW ENGAGING, overall_width: 0.875 INCHES NOMINAL IN, overall_height: 0.562 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-197-3495, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A1-05-0411
NSN: 5340-01-197-3495
FSC: 5340 — Hardware, Commercial
CAGE: 18560 — ACR ELECTRONICS, INC. DBA ACR ELECTRONICS INC (USA)
SPECIFICATIONS
width0.750 INCHES NOMINAL IN
height0.250 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING LEVER
design_typeCLAW ENGAGING
hole_quantity1
overall_width0.875 INCHES NOMINAL IN
overall_height0.562 INCHES NOMINAL IN
overall_length0.969 INCHES NOMINAL IN
operation_methodLEVER
surface_treatmentZINC AND CHROMATE LEVER
catch_strike_styleMORTISE
material_thickness0.062 INCHES NOMINAL IN
NSN5340-01-197-3495
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: A1-05-0411 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE HOLE QUANTITY: 1
•
DESIGN TYPE: CLAW ENGAGING
•
ENGAGING SURFACE WIDTH: 0.594 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
CATCH STRIKE STYLE: MORTISE
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.562 INCHES NOMINAL IN
SURFACE HOLE QUANTITY1
DESIGN TYPECLAW ENGAGING
ENGAGING SURFACE WIDTH0.594 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
CATCH STRIKE STYLEMORTISE
OVERALL LENGTH0.969 INCHES NOMINAL IN
OVERALL WIDTH0.875 INCHES NOMINAL IN
HEIGHT0.250 INCHES NOMINAL IN
SURFACE HOLE DIAMETER0.172 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A1-05-0411?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A1-05-0411?
A1-05-0411 is a CATCH,CLAMPING.
What is the NSN for A1-05-0411?
A1-05-0411 is cataloged in the U.S. Government catalog under NSN 5340-01-197-3495. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A1-05-0411

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.