A0L4167-3 — SCREW,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

A0L4167-3: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.036 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.104 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN, thread_length: 0.194 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN, screw_material: IRON ALLOY 660. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-095-4606, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

A0L4167-3

NSN: 5305-01-095-4606
FSC: 5305 — Screws
CAGE: 57472 — ALL MANUFACTURERS, INC. DBA ALLIED HARBOR AEROSPACE FASTENERS (USA)

SPECIFICATIONS

head_style	PAN
head_height	0.036 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN
thread_class	3A A
head_diameter	0.104 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
thread_length	0.194 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
screw_material	IRON ALLOY 660
fastener_length	0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
internal_drive_style	CROSS RECESS TYPE 1
nominal_thread_diameter	0.060 INCHES IN
screw_surface_treatment	PASSIVATE
minimum_tensile_strength	160000 POUNDS PER SQUARE INCH LBS
NSN	5305-01-095-4606

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.036 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN

•

SCREW SURFACE TREATMENT: PASSIVATE

•

FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE

•

THREAD LENGTH: 0.194 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN

•

NOMINAL THREAD DIAMETER: 0.060 INCHES IN

•

HEAD STYLE: PAN

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.036 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT	PASSIVATE
FASTENER LENGTH	0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
THREAD LENGTH	0.194 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER	0.060 INCHES IN
HEAD STYLE	PAN
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	IRON ALLOY 660
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH LBS

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831

SUBSTITUTES & CROSS-REFERENCES 4

FS2002-00/003CReference document

Same NSN cross-reference

Reference document — Secondary reference

965812-3CReference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

E516-3Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

9135-3Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required

Ready to buy A0L4167-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is A0L4167-3?

A0L4167-3 is a SCREW,MACHINE.

What parts can replace A0L4167-3?

There are 4 known substitutes for A0L4167-3: FS2002-00/003C, 965812-3C, E516-3 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for A0L4167-3?

A0L4167-3 is cataloged in the U.S. Government catalog under NSN 5305-01-095-4606. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

A0L4167-3 — SCREW,MACHINE

Request a Quote — A0L4167-3