PartsTable
Technical Data Sheet
Download PDF

A07484.004.528 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

A07484.004.528: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL NUT, nut_style: HEXAGON, nut_height: 0.270 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-484-5365, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A07484.004.528
NSN: 5310-01-484-5365
FSC: 5310 — Nuts and Washers
CAGE: 01343 — ANDERSON GREENWOOD LP DBA ANDERSON GREENWOOD CROSBY (USA)
SPECIFICATIONS
materialSTEEL NUT
nut_styleHEXAGON
nut_height0.270 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
width_across_flats0.500 INCHES NOMINAL IN
nominal_thread_size0.312 INCHES IN
bearing_surface_typeCHAMFERED
end_item_identificationLOS ANGELES CLASS SSN (688), VALVE, ANGLE
thread_quantity_per_inch18
NSN5310-01-484-5365
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A07484.004.528 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.500 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
NUT HEIGHT: 0.270 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.500 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
NUT HEIGHT0.270 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS2B
END ITEM IDENTIFICATIONLOS ANGELES CLASS SSN (688), VALVE, ANGLE
THREAD QUANTITY PER INCH18
MATERIALSTEEL NUT
SUBSTITUTES & CROSS-REFERENCES 2
A7484Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
SW137-13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy A07484.004.528?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A07484.004.528?
A07484.004.528 is a NUT,PLAIN,HEXAGON.
What parts can replace A07484.004.528?
There are 2 known substitutes for A07484.004.528: A7484, SW137-13. Substitute compatibility should be verified for your specific system.
What is the NSN for A07484.004.528?
A07484.004.528 is cataloged in the U.S. Government catalog under NSN 5310-01-484-5365. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A07484.004.528

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.