PartsTable
Technical Data Sheet
PartsTable / COMPONENT / A07058.008.127
A07058.008.127 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The A07058.008.127 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-235-0111, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
A07058.008.127
NSN: 5310-00-235-0111
FSC: 5310
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
Part NumberA07058.008.127
NSN5310-00-235-0111
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: A07058.008.127 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 1.427 INCHES MINIMUM AND 1.446 INCHES MAXIMUM IN
•
LOCKING FEATURE: PREVAILING TORQUE WITH NONMETALLIC INSERT
•
THREAD CLASS: 3B
•
NOMINAL THREAD SIZE: 1.000 INCHES IN
•
THREAD QUANTITY PER INCH: 8
•
COUNTERSINK ANGLE: 88.0 DEGREES NOMINAL NUT
•
THREAD DIRECTION: RIGHT-HAND
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH ACROSS FLATS1.427 INCHES MINIMUM AND 1.446 INCHES MAXIMUM IN
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
THREAD CLASS3B
NOMINAL THREAD SIZE1.000 INCHES IN
THREAD QUANTITY PER INCH8
COUNTERSINK ANGLE88.0 DEGREES NOMINAL NUT
THREAD DIRECTIONRIGHT-HAND
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
2643-852-01-ITEM-57L1Interchangeable
interchangeable cross-reference
interchangeable
566-6405738-SDGC-A31-1L1Interchangeable
interchangeable cross-reference
interchangeable
845-7286652-ITEM-57L1Interchangeable
interchangeable cross-reference
interchangeable
001.000-08ONC-3BInterchangeable
interchangeable cross-reference
interchangeable
4497645PC7Interchangeable
interchangeable cross-reference
interchangeable
MIL-N-25027Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy A07058.008.127?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is A07058.008.127?
A07058.008.127 is a A07058.008.127.
What parts can replace A07058.008.127?
There are 27 known substitutes for A07058.008.127: 2643-852-01-ITEM-57L1, 566-6405738-SDGC-A31-1L1, 845-7286652-ITEM-57L1 and 24 more. Substitute compatibility should be verified for your specific system.
Is A07058.008.127 still available?
A07058.008.127 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — A07058.008.127

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026